Quick Links
Assembly, Installation, Setup, and Operating Instruction
- Beach King Mount Models; Series 400 -
Holds Kayaks / Paddleboards up to 100 pounds.
For Beach King Docks with Adapter Track
Mounts to the Dock Siderail
Tools are required (7/16 & 3/4) Open End Wrenches) for initial
installation.
Dock Model DS400 - Aluminum Dockside Operation
- Operates from the Dockside Only.
- Holds your Kayak / Paddleboard 5 to 17 inches below the dock surface.
- Accommodates Freeboard (Dock Surface to Water Level) height up to 30 inches.
Model WS400 - Aluminum Waterside Operation
- Operates from the Waterside Only.
- Holds your Kayak / Paddleboard 5 to 17 inches below the dock surface.
- Accommodates Freeboard (Dock Surface to Water Level) height up to 36 inches.
Please read these instructions carefully before using this product and save this
manual for future use.
For assistance, please call: 585 - 734 - 7374
Or send email to:
"
The DockSider"
Patented
OM400 - 0721
A Kayak / Paddleboard Lift and Dock Storage Rack
DockCraft Industries LLC
3694 Nibawauka Beach
Canandaigua, New York 14424
Page 1 of 11
TM
Some
Assembly
Required
SM
Related Manuals for DockCraft The DockSider 400 Series
Summary of Contents for DockCraft The DockSider 400 Series
- Page 1 Please read these instructions carefully before using this product and save this manual for future use. For assistance, please call: 585 - 734 - 7374 Or send email to: [email protected] DockCraft Industries LLC 3694 Nibawauka Beach Canandaigua, New York 14424 Page 1 of 11...
- Page 2 6. To ensure proper use, do not attempt to modify this product in any manner. Please refer to the manual if questions arise. 7. If further assistance is needed, please contact DockCraft Industries prior to use. 8. Do not allow children or adults to lean on, play on, around, or with the “The DockSider”...
- Page 3 Remove all parts from the box and remove the dock mount from the pivot lateral by unwrapping the mini wrap. If any parts are missing from the package (in type or quantity), do not assemble and contact DockCraft Industries immediately.
- Page 4 Assembly Instructions Attach Cradle Handle : 1 - Position Handle over Cradle. 2 - Slide the Handle over extension on Cradle. 3 - Depress Snap Button on Cradle. 4 - Seat Handle until Snap Button pops through the Handle hole. 5 - Repeat process for the other Cradle.
- Page 5 Assembly Instructions – continued Insert Clevis Pins to set height of rack from water – continued Waterside Rack Hole 4 Hole 4 Hole 4 Hole 2 Hole 2 Circular Hole 2 Retaining Ring Clevis Pin Head Circular Retaining Ring Clevis Pin Head Thread Webbing through Cam Buckle : 8 - Obtain one of the Cam Buckles and Depress Lever...
- Page 6 Completed Assemblies Dockside Operation Model – DS400 Waterside Operation Model – WS400 Beach King Mount Installation With the Purchase the Series 400 Beach King Mount With your Lift and Dock Storage Rack ½ inch bolts split washers ½ inch Square nuts You get the Mount, Mounting Angles, and Hardware You have the Beach King Dock Qty 2 sets...
- Page 7 Beach King Mount installation - continues Adjust the two mounts per the dimensions below, then tighten to secure When mounted, the distance between mounts should be, - Dockside Unit - 32 inches apart (center to center) On Center - Waterside Unit - 26 ½ inches apart (center to center) Installation Procedure for Your - Series 100 Docksider Kayak Storage Rack to Water Level Adjustment: Now that the Mounts are in place;...
- Page 8 If Clevis Pin with Circular Retaining Ring in Hole 2 or 4 of Pivot Lateral is seated in the Bottom Slot Rotate the Latch Plates to secure in Storage Position Latch Plate The Installation is Complete SETUP of “The DockSider” Now that the installation is complete, it is now time to SETUP your Kayak Rack to “fit”...
- Page 9 SETUP of “The DockSider” continued If your kayak wants to lean to the right or left, check the straps to see if there is an excessive amount of strap on the side that’s leaning, if so shorten. Also, you may want to adjust the position of the kayak in the rack. If the lean is to the left, reposition the kayak slightly to the right to have the center of gravity positioned between the straps.
- Page 10 Secure Loose end of webbing length as follows: continued Thread the loose end of webbing through Webbing Keeper (each side of unit) Cam Buckle Loose End of Webbing Cam Buckle Kayak End of Webbing Note: It is much easier to thread the webbing through the webbing keeper with the Kayak out of the Kayak Rack.
- Page 11 You’re DONE - just Load / Latch / and walk away! WE SINCERLY HOPE YOU ENJOY THE CONVENIENCE OF DockCraft Industries LLC “The DockSider” 3694 Nibawauka Beach For assistance, please call: 585 – 734 – 7374...