Table of Contents
HINTS FOR TIMER RECORDING
• If there is a power failure or the VCR is unplugged for more than 30 seconds, the clock setting and all
timer settings will be lost.
• If the tape runs out before the end time, the VCR will switch to the Stop mode immediately, eject the tape
and the VCR power will be turned off. The "
• If a tape is not in the VCR or does not have the erase-protection tab, the "
recording cannot be performed. Please insert a recordable tape.
• The TV that is connected to your VCR may be turned ON or OFF when the VCR is in the timer-record
mode.
TO CHECK THE AUTOMATIC TIMER PROGRAM.
1) Turn the power on.
2) Press the MENU button. The details of the your program appear on the TV screen.
1
3
5
• If the program you wish to check is not on the screen, press the PLAY/
desired program appears.
3) Press the RESET/EXIT button to return to original mode.
4) Press the POWER button to return to timer stand-by mode.
TO CORRECT OR CANCEL AN AUTOMATIC TIMER PROGRAM
1) Turn the power on.
2) Press the MENU button. The details of the your program appear on the TV screen.
1
3
5
3) Select the program which you want to correct or cancel using the
• If the program you wish to correct or cancel is not on the screen, press the PLAY/
until your desired program appears.
NOTE: If some empty program numbers exist, the lower program number appears on the TV screen by
pressing the REW/
button.
In this case, you can enter the new program. Press the F.FWD/
then continue with the step [3] in the "AUTOMATIC TIMER RECORDING" section.
4) Press the F.FWD/
button.
ONE TIME PROGRAM
PROGRAM NUMBER
DATE
START TIME
END TIME
CHANNEL
REC SPEED
• To cancel the program, press the REW/ button during the program number flashes.
• To correct the program, go to the digit you want to change by using the F.FWD/
button. Then, enter the correct numbers using the
5) Press the RESET/EXIT button to return to original mode.
6) Press POWER button to return to timer stand-by mode.
TO STOP A STARTED AN AUTOMATIC TIMER PROGRAM
Press the STOP/EJECT button on the VCR.
" indicator will flash.
TIMER PROGRAMMING
DATE STA/END
05/04 07:30 PM
THU
08:30 PM
05/11 10:00 PM
W THU 10:54 PM
05/21 11:00 PM
DAILY 11:30 PM
TIMER PROGRAMMING
DATE STA/END
05/04 07:30 PM
THU
08:30 PM
05/11 10:00 PM
W THU 10:54 PM
05/21 11:00 PM
DAILY 11:30 PM
1
05/04 THU
07:30 PM
08:30 PM
16
SP
35
" indicator flashes and timer
CH
16
SP
125
SLP
40
SLP
or STOP/
CH
16
SP
125
SLP
40
SLP
/PLAY or
button during program number flashes,
/PLAY or
/STOP button.
button until your
/STOP button.
or STOP/
button
button or REW/
Hide quick links:
Table of Contents
