Hitachi VT-MX410EUK Owner's Manual

Hitachi VT-MX410EUK Owner's Manual

Video cassette recorder

Quick Links

Owner's Manual
Please read before using this product.
IMPORTANT COPYRIGHT INFORMATION
Unauthorised recording or use of broadcast television pro-
gramming, video tape, film or other copyrighted material
may violate applicable copyright laws. We do not take
responsibility for the unauthorised duplication, use, or
other acts which infringe upon the rights of copyright own-
ers.
A NOTE ABOUT RECYCLING
This product's packaging materials are recyclable and can
be reused. Please dispose of any materials in accordance
with your local recycling regulations.
Batteries should never be thrown away or incinerated but
disposed of in accordance with your local regulations con-
cerning chemical wastes.
This appliance has a serial number located on the rear
panel. Please note down the model number and
serial number and retain the imformation for your records.
Model number:
Serial number:
Positioning
• Do not place the VCR directly on top of, or underneath, your
TV set. Ensure that there is at least 20 cm between the VCR
and the TV set, and that air can circulate freely through the
ventilation openings of the VCR.
PRECAUTIONS
Important
• Use only cassettes with the VHS mark with this VCR.
Power Supply
• The main power supply is engaged when the power cord
plug is plugged in a 220-240V
ate the unit, press the OPERATE button to turn on the unit.
(The "PWR." indicator on the display comes on.)
Dew Warning
• Moisture condensation may occur inside the unit when it is
moved from a cold place to a warm place, after heating up
a cold room, or under conditions of high humidity. Do not
use the VCR for at least 2 hours until its inside is dry.
Warning
• To avoid fire or electric shock, do not expose this unit to
rain or moisture.
WARNING: LIVE PARTS INSIDE. DO NOT REMOVE
ANY SCREWS.
Printed in China
TJ17544
50Hz, AC outlet. To oper-
VIDEO CASSETTE RECORDER
VT-MX410E(UK)
Safety Precaution
WARNING: DANGEROUS VOLTAGE INSIDE
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
Features
• Automatic Operations
• On Screen Display
• Auto Repeat Playback
• Picture Select
• One Touch Recording
• Parents Lock
• Auto Return
• Timer Recording
• Auto Head Cleaner
• NTSC Playback
VIDEO Plus+ and PlusCode are registered trade-
marks of Gemstar Development Corporation. The
VIDEO Plus+ system is manufactured under
license from Gemstar Development Corporation.
Cautions
Do not attempt to open the cabinet. There are no parts
1
you can service inside. Refer all servicing to qualified ser-
vice personnel.
Slots and openings in the cabinet and the sides or bottom
2
are provided for ventilation. To ensure reliable operation
and to protect the unit from overheating, these openings
must not be blocked or covered.
Avoid installation in enclosed spaces such as bookcases
unless proper ventilation is provided.
Keep the unit away from radiators and other heat
3
sources.
Avoid use near strong magnetic fields.
4
Do not push objects of any kind into the VCR through the
5
cabinet slots or openings as they could touch electrically
live parts or short circuit parts resulting in a fire or electric
shock.
Never spill liquid on this unit. If liquid is spilled and pene-
6
trates into the unit, consult qualified service personnel.
7
Use this unit in a horizontal (flat) position only.
Before attempting to operate the unit, make sure that the
8
timer recording mode is "OFF".
This product is in Stand-by mode when it turns off while
9
the power cord is connected.
10
Do not place any combustible objects on the device
(candle, etc.).
1
• Auto Clock Setting
• PDC
0VMN04185
HG260BD * * * * *
EN
Table of Contents
loading

Summary of Contents for Hitachi VT-MX410EUK

  • Page 1 VIDEO CASSETTE RECORDER Owner’s Manual VT-MX410E(UK) Please read before using this product. Safety Precaution IMPORTANT COPYRIGHT INFORMATION Unauthorised recording or use of broadcast television pro- WARNING: DANGEROUS VOLTAGE INSIDE gramming, video tape, film or other copyrighted material WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO may violate applicable copyright laws.
  • Page 2: Table Of Contents

    PDC (Programme Delivery Control) ....................13 Auto Return ............................13 Parents Lock ............................14 Copying a Video Tape........................14 A Status Display ..........................14 Video Cassette Tape...........................14 TV Colour System..........................14 TROUBLESHOOTING GUIDE ......................15 DECLARATION OF CONFORMITY.................. Back cover HITACHI - YOUR GUARANTEE (UK & Ireland)............... Back cover...
  • Page 3: Maintenance

    MAINTENANCE Cabinet Cleaning • Wipe the front panel and other exterior surfaces of the VCR with a soft cloth that has been immersed in lukewarm water and wrung dry. • Never use a solvent or alcohol. Do not spray insecticide liquid near the VCR. Such chemicals may cause damage and dis- colouration to the exposed surfaces.
  • Page 4: Description Of Controls

    DESCRIPTION OF CONTROLS Front Panel 1. Cassette compartment D (F.FWD) button 3. B (PLAY) button 4. E (REW) button 5. C A ( STOP/EJECT) button 6. I ( REC/OTR) button PROGRAM 7. Indicator (See below) 8. PROGRAM (o/p) [TRACKING] TRACKING buttons 9.y (OPERATE) button Indicator...
  • Page 5: Remote Control

    Remote Control SPECIFICATIONS General Specifications Television system: PAL I TV standard Video heads Rotary two-head helical scan system OPERATE EJECT Tape width : 12.65mm Tape speed SP : 23.39mm/sec. LP : 11.70mm/sec. Tuner channel IRA~IRJ PROGRAM E21~E69 CATV VIDEO Plus+ DAILY/WEEKLY RF converter : Built-in UHF converter...
  • Page 6: Connecting The Vcr

    CONNECTING THE VCR VCR to TV Connection AV1 (TV) CONNECTION TO TV If your TV has Scart sockets, you may connect your VCR’s Disconnect the TV’s power cord from the AC outlet. AV1 (TV) scart socket to the Scart socket on the back of your TV.
  • Page 7: Initial Setup

    “0” for most makes of TV incl. Press the PLAY/o or STOP/ L button to select “CLOCK”, Hitachi - If in doubt consult your television instruction then press the F.FWD/B button. book for details). Follow your television tuning instruc- Press the PLAY/o or STOP/ L button to select “MANU-...
  • Page 8: Tuning

    TUNING Tuning of broadcast channels not already preset in the VCR To Select a Desired Channel can be performed in two ways. You can select a desired channel by using the PROGRAM AUTOMATIC TUNING (o/p) buttons, or directly pressing the NUMBER buttons on •...
  • Page 9: To Skip A Preset Channel

    Channel Order MENU INITIAL The TV stations will normally be stored in the following TIMER CH TUNING SET UP CLOCK order: BBC1, BBC2, ITV, CH4 and CH5. INITIAL RF OUT You can rearrange the order as follows. • Use the remote control for this procedure. Press the MENU button.
  • Page 10: Basic Operation

    BASIC OPERATION Recording Playback Tracking Adjustment Viewing and Recording the same Programme • Tracking adjustment will be activated automatically (Digital Tracking function) when you start playback. Insert a cassette tape with its erase-prevention tab in • When playing pre-recorded tapes or tapes recorded on place.
  • Page 11: Advanced Operations

    ADVANCED OPERATIONS NOTES: Counter Memory • Once you select the Auto Repeat mode, it stays in effect This feature can be used to memorise a beginning point that even after you turn off VCR. you want to watch again. Rewinding or fast forwarding •...
  • Page 12: Automatic Operations

    Automatic Operations For once-only recording only : Press the PLAY/o or STOP/ L button repeatedly until your desired day Automatic Rewind, Eject, Off appears. When the end of a tape is reached during recording, play- Press the PLAY/o or STOP/ L button repeatedly until the back, or fast-forward, the tape will automatically rewind to relevant start hour appears.
  • Page 13: Pdc (Programme Delivery Control)

    Hint for Timer Recording Press the PLAY/o or STOP/ L button repeatedly until the desired tape speed appears. • If there is a power failure or the VCR is unplugged for more Press the PLAY/o or STOP/ L button to set PDC “ON” or than 1 minute, the clock setting and all timer settings will be “OFF”.
  • Page 14: Parents Lock

    Parents Lock A Status Display Parents Lock prevents use of the VCR by making the VCR fea- • To check the Counter, or Clock & Channel number, ture buttons on the VCR and the remote control inoperative. press the DISPLAY button. Each time you press the DIS- •...
  • Page 15: Troubleshooting Guide

    TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your VCR, locate the SYMPTOM in the left column below. Check the corresponding cell CORRECTIVE ACTION columns to remedy the problem. SYMPTOM CORRECTIVE ACTION No power.
  • Page 17 SOME DO’S AND DON’TS ON THE SAFE USE OF EQUIPMENT This equipment has been designed and manufactured to meet international safety standards but like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. ★★★★★★★★★★★...
  • Page 18 MEMO...
  • Page 19 MEMO...
  • Page 20: Declaration Of Conformity

    HITACHI EUROPE LTD. Please note that evidence of the date of purchase will be required before service under guarantee is carried out. This guarantee does not affect your statutory rights. In all cases of difficulty consult your HITACHI dealer. HITACHI EUROPE LTD.
  • Page 21 Fax: +46 (0) 8 562 711 13 Tel: +39 02 38073415 Servizio Clienti Email: [email protected] Fax: +39 02 48786381/2 Email: [email protected] HITACHI EUROPE S.A.S HITACHI EUROPE LTD (Norway) AB Lyon Office STRANDVEIEN 18 B.P. 45, 69671 BRON CEDEX 1366 Lysaker FRANCE...

This manual is also suitable for:

Vt-mx410e

Table of Contents