Table of Contents
FCB-IX47/IX47P
FCB-IX470/IX470P
FUNCTIONS
Basic/Extended Control
Basic control of the camera module functions can be done using the built-in keyboard.
In this mode, user can control zoom (fixed speed), manual focus (fixed speed), and switch AutoFocus ON/OFF.
Shutter speed is fixed 1/60s (1/50s), white balance, iris and gain are automatic.
Extended control of the camera module functions is possible by analog connections (refer to SW-JIG) and by VISCA™/
RS-232C.
Zoom
The FCB-IX47/P and FCB-IX470/P use an 18× zoom lens as well as a 4× digital zoom.
• Optical 18×, f = 4.1 to 73.8 mm (F 1.4 to F 3.0)
The horizontal angle of view is approximately 48° (wide end) to 2.7° (tele end).
The digital zoom is automatically switched ON at the tele end of 18× optical zoom range, with a progressive effect from 1 to
4, giving a total maximum 72× zoom ratio. Digital zoom increases the picture element size and reduces the resolution.
Extended control of zoom:
• Direct zoom position
• Zoom speed selection (8 speeds)
• Digital zoom can switched ON/OFF
4
Chapters
Table of Contents
