Quick Links
E N G L I S H
®
Installing Bio-Charge
Bottle
®
Use only InSinkErator
Bio-Charge
discharge and spill.
• Unscrew Bio-Charge
®
dispenser cap nozzle counterclockwise until nozzle pops upward to dispensing position. Do not remove dispenser cap
nozzle.
• Align bottle with concave side toward disposer. IMPORTANT: Press septic assist bottle firmly into place. The bottle MUST be seated into the
dispose housing for proper operation; there SHOULD NOT be a gap. (When installed correctly, the button on the disposer housing will be
fully ejected.
• Release button. Pull bottle down slightly to ensure it is engaged.
Replacing Bio-Charge
®
Bottle
To keep your septic system operating at peak efficiency, replace the Bio-Charge
• Make sure disposer is off.
• Press button on disposer just above bottle and pull bottle down to remove it. (Do not refill or reuse empty bottle.)
INSTALLING AND REPLACING THE BIO-CHARGE
®
septic assist bottles. Do not squeeze the Bio-Charge
®
BOTTLE
®
Bottle; squeezing the bottle may cause Bio-Charge
®
bottle when it is empty.
®
to
1
Related Manuals for Emerson In Sink Erator BIO-CHARGE
Summary of Contents for Emerson In Sink Erator BIO-CHARGE
- Page 1 E N G L I S H INSTALLING AND REPLACING THE BIO-CHARGE ® BOTTLE ® Installing Bio-Charge Bottle ® ® ® ® Use only InSinkErator Bio-Charge septic assist bottles. Do not squeeze the Bio-Charge Bottle; squeezing the bottle may cause Bio-Charge discharge and spill.
- Page 2 E S P A Ñ O L INSTALACIÓN Y CAMBIO DE LA BOTELLA BIO-CHARGE ® Instalación de la Botella Bio-Charge ® Use únicamente Bio-Charge ® de InSinkErator. No apriete la Botella Bio-Charge ® ; apretar la botella puede causar la salida y derrame del Bio-Charge ®...