Operating your Fan
Always choose a safe location for the fan, keeping in mind the safety precautions outlined.
Ensure all packaging has been removed from the unit before use. This appliance requires no
installation, it should be used solely as a portable appliance.
WARNING:
Keep all objects at least 300mm from the front, sides and rear of
the appliance.
NOTE: Before filling the unit with water, unplug the Power Adapter from the wall and from the unit.
Always use two hands to carry the unit.
Place the air cooler in the desired location before filling with water.
The front of the unit should be located within 1.8M of the desired personal cooling zone. We recommend
placing a waterproof pad or cloth under the unit.
Remove the water tank from the air cooler
Remove the water tank cap, turning it counter clockwise
Fill the water tank with clean, cool (not cold) water.
We recommend using distilled water if you live in a hard water area.
Replace the tank cap turning clockwise until tight.
Ensure to not over tighten.
Place the tank into the unit, making sure the tank is firmly seated.
Water will begin to flow into the water reservoir.
Once the water stops emptying into the water reservoir,
remove the water tank and repeat steps 1-5 to completely
fill the water tank and reservoir
5
