Use The Built-In Digital Camera To Take And Send Pictures - HP iPAQ hw6510 Manual

Mobile messenger series

Hide thumbs Also See for iPAQ hw6510:

Table of Contents

To change port number, tap the Advanced button and enter the

number in the HTTP proxy box.

Tap OK to exit the program.

Depending on where you are in the program, you may have to tap

OK several times to exit.

NOTE: At this point, be sure your HP iPAQ is cradled and you have

synchronized with your personal computer using ActiveSync.

Verify you have Internet access on your HP iPAQ by visiting a web

site such as

If you still cannot access the Internet, take your HP iPAQ out of the cradle

and use a GPRS connection. For details, refer to "Creating a GPRS/EDGE

Connection" in Chapter 7 of the User's Guide that is located on the

Companion CD.

NOTE: If you are going to use GPS Navigation in your vehicle for an

extended period of time, connect your HP iPAQ to an Auto adapter to

save battery power. If you don't have an Auto adapter, you can order

one at www.hp.com/go/ipaqaccessories.

For detailed instructions on using the GPS Navigation System, refer to

"Using GPS Navigation" in Chapter 8 of the User's Guide located on the

Companion CD.

How Do I Use the Built-in Digital Camera to Take and

Send Pictures?

NOTE: The built-in camera is available only on select HP iPAQ models.

If you purchased an HP iPAQ with a built-in camera, the camera allows

you to turn your HP iPAQ into a mobile digital imaging center. You can

share images through e-mail or the Web, print from your HP iPAQ using

Bluetooth, or transfer files to the HP iPAQ for storage.

www.google.com

or www.yahoo.com.