Troubleshooting; Hp Visualize Fx6 Configuration And Troubleshooting Guide; Hp Visualize Fx6 Diagnostics Utility - HP Kayak XW04 User Manual

Pc workstation

Hide thumbs Also See for Kayak XW04:

Table of Contents

NOTE

Troubleshooting

If you require any help to configure and use the OpenGL video driver, or you

have some hardware or software problems, refer to the HP VISUALIZE fx6

Configuration and Troubleshooting Guide on the HP World Wide Web site:

http//www.hp.com/go/kayaksupport

This guide can also be found on the Kayak Drivers CD-ROM (delivered with

the PC Workstation).

A diagnostics utility for the HP VISUALIZE fx6 video controller is

preinstalled on the hard disk. To run this utility,

Start/Programs/HP Diagnostics/HP Visualize Diagnostics

The diagnostic utility can also be found on the Kayak Drivers CD-ROM

(delivered with the PC Workstation) or on the HP World Wide Web site

(refer to above for the WWW address).

This utility can be used only when Windows NT in VGA mode is running and

the HP VISUALIZE fx6 OpenGL driver is installed. It provides a good level of

confidence in the video hardware in situations such as intermittent system

hangs or unusual graphics behavior on the screen.

If you are not in Windows NT VGA mode, reboot the PC workstation,

selecting Windows NT VGA mode when prompted during the startup

sequence.