Hitachi P50S602/D8UF Service Manual
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Monitor
  5. P50S602/D8UF
  6. Service manual
Hitachi P50S602/D8UF Service Manual

Hitachi P50S602/D8UF Service Manual

Hide thumbs
Table of Contents

Quick Links

PA
No. 0235
P50S602 / D8UF
P50A202 / D8UF
SERVICE MANUAL
P50A402 / D8UF
NTSC
D8UF
R/C: CLU-4984S
ATSC
Chassis
SERVICE MANUAL REVISION HISTORY INFORMATION
DATE
REVISION #
REASON
May 28 2008
SM00001
FIRST ISSUE OF MANUAL
SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT
PLASMA DISPLAY PANEL
MAY 2008
HIMEX MANUFACTURING DIVISION
Table of Contents
loading

Related Manuals for Hitachi P50S602/D8UF

Summary of Contents for Hitachi P50S602/D8UF

  • Page 1 No. 0235 P50S602 / D8UF P50A202 / D8UF SERVICE MANUAL P50A402 / D8UF NTSC D8UF R/C: CLU-4984S ATSC Chassis SERVICE MANUAL REVISION HISTORY INFORMATION DATE REVISION # REASON May 28 2008 SM00001 FIRST ISSUE OF MANUAL SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT PLASMA DISPLAY PANEL MAY 2008 HIMEX MANUFACTURING DIVISION...

  • Page 2: Plasma Display Panel

    No. 0235 P50S602 / D8UF P50A202 / D8UF SERVICE MANUAL P50A402 / D8UF NTSC D8UF R/C: CLU-4984S ATSC Chassis TO GO TO A CHAPTER, CLICK ON ITS HEADING BELOW CONTENTS SAFETY PRECAUTIONS ......... . . PRODUCT SAFETY NOTICE .

  • Page 3: Safety Precautions

    D8UF SAFETY PRECAUTIONS Leakage Current Hot Check Plug the AC line cord directly into a 120V AC outlet. (Do NOTICE: Comply with all cautions and safety-related notes not use an isolation transformer during this test.) Use a located on or inside the cover case and on the chassis or leakage current tester or a metering system that complies Plasma module.

  • Page 4: Product Safety Notice

    Product safety is continuously under review and new instructions are issued from time to time. For the latest information, always consult the current HITACHI Service Manual. A subscription to, or additional copies of HITACHI Service Manuals may be obtained at a nominal charge from HITACHI Sales Corporation.

  • Page 5: Servicing Precautions

    D8UF SERVICING PRECAUTIONS CAUTION: Before servicing instruments covered by this Electrostatically Sensitive (ES) Devices service data and its supplements and addendum, read and Some semiconductor (solid state) devices can be damaged follow the information in previous pages number 2 and 3 of easily by static electricity.
  • Page 6 “original leads”. If they are not shiny, reheat them IC Removal/Replacement and, if necessary, apply additional solder. Some Hitachi unitized chassis circuit boards have slotted holes (oblong) through which the IC leads are inserted and then bent fl at against the circuit foil. When holes are the slotted type, the following technique should be used to remove and replace the IC.
  • Page 7 Hitachi personnel. 3. Connect insulated 20-gauge jumper wire from the nearest At IC Connections component on one side of the pattern break to the lead of To repair defective copper pattern at IC connections, use the nearest component on the other side.

  • Page 8: Component Removal

    D8UF Leadless Chip Components How to Replace Flat-lC (surface mount) —Required Tools— Chip components must be replaced with identical chips • Soldering iron • iron wire or small awl due to critical foil track spacing. There are no holes in •...
  • Page 9 D8UF Information for service about the lead-free solder introduction. Hitachi introduced lead-free solder to conserve the “Earth Environment”. Please refer to the following before servicing. (1) Characteristic of lead-free solder Melting point of lead free solder is 40-50°C higher than solder containing lead.

  • Page 10: Agency Regulatory Information

    The FCC requires the user to be notifi ed that any changes or modifi cations made to this device that are not expressly approved by Hitachi America ,Ltd. Home Electronics Division may void the user’s authority to operate the equipment.
  • Page 11 D8UF INTRODUCTION This HITACHI Service Manual is intended for the qualifi ed service personnel and it contains the necessary infor- mation for troubleshooting the PDP television set in case of malfunction. MODEL CHASSIS P50S602 D8UF This service manual includes the information for the next models and chassis.

  • Page 12: Power Ratings

    D8UF POWER RATINGS: Indicated Value Model Average Max Rating Chassis Name Rating(W) P50S602 D8UF P50A202 4.02 D8UF P50A402 4.02 D8UF TERMINALS AND JACKS Component Phono Model HDMI Composite Antenna Optical Upgrade (YPbPr) S-video Jack for number input video (RF) input output card slot input...

  • Page 13: Antenna Connection

    NOTE Connecting a 300-Ohm twin lead connector may cause interference. Using a 75-Ohm coaxial cable is recommended. 2. CONNECT YOUR NEW HITACHI PLASMA TV TO THE POWER SOURCE c). The Indicating Lamp will light Red (Standby mode) and a). Connect the power cord to your TV set and secure it with then light blue (image displays).

  • Page 14: Side Panel Connections

    D8UF Side Panel Connections The following connection diagrams are offered as suggestions. However, you may need to modify them to accommodate your particular assortment of components and features. For best performance, video and audio cables should be made from coaxial shielded wire. The SIDE panel HDMI jack is provided as a convenience to allow you to easily connect HDMI or DVI signals from a DVD, Set-Top-Box, Video Game as shown in the following examples (When connecting DVI signal it will need to connect the audio output into the Side Audio Input jacks).

  • Page 15: Rear Panel Connections

    D8UF REAR PANEL CONNECTIONS Outside antenna Cable TV coaxial cable 2-Way signal splitter HDMI HDMI HDMI OUTPUT HDMI DIGITAL OUTPUT CAPABILITY HDMI OPTICAL OUTPUT OUTPUT DIGITAL OUTPUT AUDIO OUT STEREO SYSTEM AMPLIFIER or DVD PLAYER DIGITAL DVD PLAYER HDTV SET-TOP BOX OUTPUT CAPABILITY NOTE Cables are optional, except when specified.
  • Page 16 D8UF REAR PANEL CONNECTIONS ... (continued) TV REAR PANEL CONNECTING A VIDEO AND MONAURAL AUDIO SOURCE TO INPUT 1 or 2. Connect the VIDEO and AUDIO cable from the VIDEO and OUTPUT AUDIO VIDEO AUDIO OUT jack of the VCR to the INPUT 1 or 2 (VIDEO) and (MONO)/L(AUDIO) jack, as shown on the Rear Panel on the right.
  • Page 17 D8UF REAR PANEL CONNECTIONS ... (finished) CONNECTING AN EQUIPMENT SOURCE WITH HDMI HDMI Input OR DVI CAPABILITY TO HDMI 1, HDMI 2 TV REAR PANEL HDMI DIGITAL Connect the HDMI or DVI to HDMI connection cable from the OUTPUT CAPABILITY output of the HDTV set top box or DVD player to the HDMI DVD Player/ Recorder input as shown on the Rear panel below.
  • Page 18 D8UF TABLE OF CONTENTS OF ADJUSTMENTS TO GO TO A SECTION, CLICK ON ITS HEADING BELOW. 1. Adjustment procedure start-up 1.1 How to get into adjustment mode ..........18 1.2 Changing data and selecting adjustment code .
  • Page 19 Software versions are subject to change for improvement. The “OK” button is equal to “Enter” key. Contact 1-800 Hitachi, or www.hitachiserviceusa.com The next picture shows part of the R/C indicating the buttons For the latest version of software.

  • Page 20: Factory Reset Procedure

    D8UF B. Use the Control Panel (located at the side): (6) Plug the AC cord again and turn on the TV set. All set- Menu/Select button is for calling the OSD menu or for se- tings and data are updated. lecting such menu or any other OSD option.

  • Page 21: Video Adjustment

    D8UF 5. VIDEO ADJUSTMENT 5.2 Video color temperature adjustment (HIGH) Adjustment Preparations The next adjustments are related with the picture quality. Special care must be put. (1) Turn on the PDP TV set and allow a 20 minutes heat-run 5.1 Sub-Contrast adjustment before starting the adjustment.

  • Page 22: Video Color Temperature Adjustment (Medium)

    D8UF 5.3 Video color temperature adjustment 5.5 Video color temperature adjustment (MEDIUM) (D. Cinema) NOTE: This adjustment is not necessary since NOTE: This adjustment is not necessary since its values are set by offset from the Standard its values are set by offset from the Medium col- color temperature mode.
  • Page 23 D8UF 6 Factory shipping conditions: Initial data Function P50A402 Condition P50S602 P50A202 Input Mode Channel 03/03-1 ch Favorite Channels Not registered Master Volume 20 Steps Dynamic Retail Picture Mode Home Home Contrast (White Level) 100% 100% Brightness (Black Level) Color Tint CENTER CENTER...
  • Page 24 D8UF 6 ... factory shipping conditions continued. Initial data Function Condition P50A402 P50S602 P50A202 Audio Treble Bass Balance CENTER CENTER Surround Bass Boost Audio Source Stereo Stereo Analog Broadcast Perfect Volume Loudness Language 1 [Unknown] 1 [Unknown] DTV Digital Output Dolby Digital Dolby Digital DTV C h a n n e l Auto Channel...
  • Page 25 D8UF 6 ... factory shipping conditions continued. Initial data Function Condition P50A402 P50S602 P50A202 Setup Set the Menu Options Set the Language English English Set the OSD Contrast Set The Screen Saver Picture Orbiting Option 1 Option 1 Set The Energy Options Retail Picture Energy Saving Home...

  • Page 26: Fault Symptom

    TROUBLESHOOTING THE PANEL 4.5 Fault Symptom Suspected fault Analysis procedure Fault contents Fault status location and measure After momentarily lighting, the Replace defective PCB screen becomes black See "No Picture" immediately or after a few See Troubleshooting seconds. Troubleshooting Flowchart Pg.

  • Page 27: Troubleshooting Flowcharts

    D8UF TROUBLESHOOTING FLOWCHARTS P50S602 page 1/2 Troubleshooting Flowcharts No Power Video Power Save Mode (Input1 3, HDMI1 3) Is Power Indicator This is NOT a defect. orange lighted? FAN Motor Alarm Does Power Indicator - FAN Motor trouble red blink? (or Regulator circuit (IP03 on Main board) trouble) PDP Module Alarm Does Power Indicator...
  • Page 28 D8UF ...TROUBLESHOOTING FLOWCHARTS (continued)... P50S602 page 2/2 (The following is checking procedure after removing back cover.) Are the following outputs Are the following outputs from Power Supply Unit from Power Supply Unit all normal ? all normal ? STBY+5V, +5.6V, Vcc, Va, Vs (＊) +17V(＊) [1st] Check Power Supply Unit.
  • Page 29 D8UF ...TROUBLESHOOTING FLOWCHARTS (continued)... P50A402, P50A202 page 1/2 Troubleshooting Flowcharts No Power Video Power Save Mode (Input1 3, HDMI1 3) Is Power Indicator This is NOT a defect. orange lighted? FAN Motor Alarm Does Power Indicator - FAN Motor trouble red blink? (or Regulator circuit (IP03 on Main board) trouble) PDP Module Alarm...
  • Page 30 D8UF ...TROUBLESHOOTING FLOWCHARTS (fi nished). P50A402, P50A202 page 2/2 (The following is checking procedure after removing back cover.) Are the following outputs Are the following outputs from Power Supply Unit from Power Supply Unit all normal ? all normal ? STBY+5V, +5.6V, Vcc, Va, Vs (＊) +17V(＊)

  • Page 31: Block Diagrams

    D8UF BLOCK DIAGRAMS P50S602 page 1/2 General block diagram ABUS Plasma Data Processor Data Converter Display LOGIC Panel Scan Controller Module Vcego Vsago (LVDS) Power CPUgo Supply PDPgo Unit AC Inlet Fuse w/ NoiseFilter Main PWB Reg. for FAN AC-CLK DC-DC Demodulator VCXO...
  • Page 32 D8UF BLOCK DIAGRAMS P50S602 page 2/2 Power System block diagram for the whole TV set. AC120V PDP Panel Module Power Supply Unit STBY+5.6V +5.6V +17V Audio+17V +10V DC-DC Vari. Reg. Reg. +3.3V Reg. +3.3V Reg. Reg. Sync. MICRO Sep. +3.3V Buffer Reg.
  • Page 33 D8UF BLOCK DIAGRAMS P50A402 and P50A202 page 1/2 General block diagram ABUS Plasma Data Processor Data Converter Display LOGIC Panel Scan Controller Module Vcego Vsago (LVDS) Power CPUgo Supply PDPgo Unit AC Inlet Fuse w/ NoiseFilter Main PWB Reg. for FAN AC-CLK DC-DC Demodulator...
  • Page 34 D8UF BLOCK DIAGRAMS P50A402 and P50A202 page 2/2 Power System block diagram for the whole TV set. AC120V PDP Panel Module Power Supply Unit STBY+5.6V +5.6V +17V Audio+17V +10V DC-DC Vari. Reg. Reg. +3.3V Reg. +3.3V Reg. Reg. Sync. MICRO Sep.
  • Page 35 D8UF CONNECTION’S DIAGRAM P50S602 Power Supply Unit PDP Module CONNECTION DIAGRAM CN23 CN23 VH-10V VH-10H N.C. N.C. AC INLET N.C. N.C. CN61 VT-2V AC(L) AC IN AC(N) CN06 PA-7V PA-7H Vcego Vcego Vsago Vsago AC OFF AC OFF MAIN board CNPPS CNPPS PE01...
  • Page 36 D8UF CONNECTION’S DIAGRAM P50A402 and P50A202 Power Supply Unit PDP Module CONNECTION DIAGRAM CN23 CN23 VH-9V VH-9H N.C. N.C. AC INLET N.C. N.C. CN61 VT-2V AC(L) AC IN AC(N) CN06 PA-7V PA-7H Vcego Vcego Vsago Vsago AC OFF AC OFF MAIN board CNPPS CNPPS...
  • Page 37 D8UF FINAL WIRING DIAGRAMS page Table of Using cable (S602) PlugPin1 PlugPin2 Symbol Board or Board or Name Name name Location Location Main PF02 LED PWB P010 Main PE01 Power Unit P002 Main PF03 CONTROL PWB P016 EFAN1 Main PFA1 X-SUS EFAN3 Main...
  • Page 38 D8UF FINAL WIRING DIAGRAMS page Table of Using cable (A402/A202) PlugPin1 PlugPin2 Symbol Board or Board or Name Name name Location Location Main PF02 LED PWB P010 Main PE01 Power Unit P002 CONTROL PWB P016 Main PF03 EFAN4 Main PFA4 MFAN1 ESP1 Main...
  • Page 39 D8UF QUICK DISASSEMBLY GUIDES THE QUICK DISASSEMBLY GUIDES ARE PENDING. SORRY FOR THE INCONVENIENCES. TABLE OF CONTENTS...
  • Page 40 D8UF FINAL ASSEMBLY GUIDES page 1.BEZEL FRAME TOP ASS'Y #110 #110 ELECTRIC CONTACT IS NECESSARY #114 PEEL THE SEPARATOR REFERENCE #114 AND PUSH THOROUGHLY TO STICK IT. 0 ± 2.5 REFERENCE(METAL STAMP) ADHESION STRENGH: MORE THAN 0.49N(50gf) DETAL DETAIL REFERENCE 2.BEZEL FRAME BOTTOM ASS'Y #114 #112...
  • Page 41 D8UF FINAL ASSEMBLY GUIDES page CONFIRM THERE IS A PRINT IN THIS SURFACE OF FRONT FILTER 4.BEZEL ASS'Y-2 (SINGLE PRODUCT LOT-No.) (P50A202) #0800 PUSH THE BOTTOM END OF THE FILTER TO THE BOSS OF THE BEZEL, AND LOCATE IT. #200D P50A402 / P50A202 #200C P50S602...
  • Page 42 D8UF FINAL ASSEMBLY GUIDES page 6.BEZEL ASS'Y-2 5.CONT UNIT ASS'Y WORK CAUTION DO NOT RUN ONTO THE BEZEL. CONT UNIT ASS'Y #260 CONVEX #260 REFERENCE P50A402/P50A202 #200D WORK CAUTION #200C P50S602 MATCH THE PWB END FACE IT WITH THE REFERENCE AND INSTALL IT.
  • Page 43 D8UF FINAL ASSEMBLY GUIDES page 7.BEZEL ASS'Y-3 WORK CAUTION WORK CAUTION INSTALL 2 AFTER INSTALLING 1 EARLIER. #130 PEEL THE SEPARATOR AND PUSH THOROUGHLY TO STICK IT. 0 ± 1.5 #284 ADHESION STRENGH: MORE THAN 0.98N(100gf) REFERENCE REFERENCE(METAL STAMP) (METAL STAMP) 1 BEZEL FRAME TOP ASS'Y 14 ±...
  • Page 44 D8UF FINAL ASSEMBLY GUIDES page 8-2.MAIN FRAME R ASS'Y 8-1.MAIN FRAME L ASS'Y #510 #510 LOCK LOCK #544 #540 P50A402 / P50A202 WORK CAUTION LET (#540) SLIDE, AND INSERT IT. #540 P50A402 / P50A202 #544 #541 P50S602 / P50V702 P50X902 #541 P50S602 / P50V702 / P50X902 VIEW 5A-5A...
  • Page 45 D8UF FINAL ASSEMBLY GUIDES page 9.PANEL ASS'Y POWER PWB ASS'Y MAIN FRAME L ASS'Y PDP UNIT ASS'Y MAIN FRAME R ASS'Y #522 (d)X8 #402 (c)X3 PANEL UNIT ASS'Y #522 MAIN FROME ASS'Y POWER PWB ASS'Y WORK CAUTION LOCATING METAL DO NOT RUN. VIEW 4B-4B MAIN FRAME L/R ASS'Y MAIN FRAME ASS'Y...
  • Page 46 D8UF FINAL ASSEMBLY GUIDES page BEZEL ASS'Y 10.CHASSIS ASS'Y-1 BEZEL ASS'Y BEZEL ASS'Y BEZEL FRAME TOP ASS'Y BEZEL FRAME TOP ASS'Y MAIN FRAME ASS'Y PANEL ASS'Y LOCATING PIN #520 5C-5C MAIN FRAME ASS'Y LOCK 5A-5A LOCK #518 LOCATING PIN #515 #516 #420 (g)X10...
  • Page 47 D8UF FINAL ASSEMBLY GUIDES page 12.CHASSIS ASS'Y-2 P50S602 P50A402, P50A202 AC INLET ASS'Y CHASSIS ASS'Y #648 11.AC INLET ASS'Y AC INLET #648 LABEL SIDE #640 AC INLET DETAIL T 7:20 LET A NAIL OF THE BTM SHIELD R INTERLOCK #646 #504 AND INSTALL THE CHASSIS ASS'Y.
  • Page 48 D8UF FINAL ASSEMBLY GUIDES page 13.FAN CUSHION ASS'Y FAN CUSHION ADHESION WORK PROCESS STICK THE CUSHION SO AS NOT TO OVERFLOW FROM THE EDGE OF THE WING OF FAN. SYMBOL No. WORK ASS'Y CUSHION (MFAN3) #451 P50S602 (#450) FAN ASS'Y 1A P50S602 (MFAN4) #450...
  • Page 49 D8UF FINAL ASSEMBLY GUIDES page REMOVE THE LOCK TO CLAMPING (#422) 15.FAN ASS'Y S-1 P50S602 ONLY WORK CAUTION WHEN YOU INSTALL FAN. LOCK AGAIN AFTER DRESSING WIRE. DETAILS DEPEND ON WIRE DRESSING DRAWING. LOCK AFTER DRESSING WIRE. #4512 #422 #4514 (w)X5 FAN ASS'Y L FAN ASS'Y R...
  • Page 50 D8UF FINAL ASSEMBLY GUIDES page 16-1.FAN ASS'Y 1A P50S602 ONLY 17.FAN ASS'Y S-2 P50S602 ONLY #4518 (v)X3 MFAN3 FAN CUSHION ASS'Y 1 #440 MFAN4 LOCK LOCK LOCK WORK CAUTION TURN FROM THE INSIDE OF (#440) #446 AND DRAW OUT THE WIRE. #4512 3:10 (w)X3...
  • Page 51 D8UF FINAL ASSEMBLY GUIDES page 18-1.FAN ASS'Y 1B 19. FAN ASS'Y A P50A402, P50A202 ONLY P50A402, P50A202 ONLY #434 LABEL SIDE (kk) (kk) #432 Wire drawing out Wire drawing out (kk) #438 (kk)X4 FAN ASS'Y 1B #436 #430 LABEL SIDE FAN CUSHION ASS'Y 4 3:10 11C-11C...
  • Page 52 D8UF FINAL ASSEMBLY GUIDES page 20-3 ,BACK COVER ASSY 20.BACK COVER SUB ASSY WORK CAUTION #700B ONLY P50S602, P50A402, P50A202 #738 INSTALLED CABLE CLAMP (#738) ON THIS DIRECTION. #726 9C-9C #720 (p)X 20 #738 #726 #738 #726 INSIDE VIEW OUTSIDE VIEW #742 REFERENCE(LABEL) #740...
  • Page 53 D8UF FINAL ASSEMBLY GUIDES page 21-1. STAND ASS'Y ONLY P50S602 #818A (r)X4 #800C P50S602 #810A #810A #800C P50S602 #818A #810A 10A-10A TABLE OF CONTENTS...
  • Page 54 D8UF FINAL ASSEMBLY GUIDES page 21-2. STAND ASS'Y ONLY P50A402, P50A202 #800B #810B #811B #811B #810B #818B #800B 11A-11A #810B #811B #818B (s)X4 #800B TABLE OF CONTENTS...
  • Page 55 D8UF FINAL ASSEMBLY GUIDES page CAUTION FOR WRONG ASS'Y 22-1.DRAWING OF OUTER SHAPE ONLY P50S602 AFTER WIPING THE DUST,MATCHING WITH STAMP LINE OF THE COVER. #734 STICK THIS LABEL PROPERLY. ADHESIVE STRENGTH:MORE THAN 1.47N (150gf) TILT SHALL BE LESS THAN 1mm. WORK CAUTION SPECIFICATION OF TILT OF FRONT AND BACK : LESS THAN ±0.5mm (VERTICAL STANDARD)
  • Page 56 D8UF FINAL ASSEMBLY GUIDES page CAUTION FOR WRONG ASS'Y 22-2.DRAWING OF OUTER SHAPE ONLY P50A402, P50A202 AFTER WIPING THE DUST,MATCHING WITH STAMP LINE OF THE COVER. #734 STICK THIS LABEL PROPERLY. ADHESIVE STRENGTH:MORE THAN 1.47N (150gf) TILT SHALL BE LESS THAN 1mm. DETAIL REFERENCE(METAL STAMP) WORK CAUTION...
  • Page 57 D8UF FINAL ASSEMBLY GUIDES page P50A402, P50A202 ONLY 23.BTM CASE,MAIN PWB ASS'Y #C108 PEEL THE SEPARATORAND PUSH THOROUGHLY TO STICK IT. ADHESION STRENGH: MORE THAN 0.49N(50gf) #C116 (c) x 3 1 ± 1 ELECTRIC CONTACT IS NECESSARY #C116 (c) x 3 MAIN PWB 3.3 ±...
  • Page 58 D8UF FINAL ASSEMBLY GUIDES page 24. MAIN PWB, HEAT SINK ASS’Y Insert the tab of (#C113) into the square hole of BTM CASE surely. ELECTRIC CONTACT IS NECESSARY #C115 PEEL THE SEPARATOR AND PUSH THOROUGHLY TO STICK IT. ADHESION STRENGH: MORE THAN 0.49N(50gf) #C114 #C114 Stick the GEL SHEET on inside the square...
  • Page 59 D8UF FINAL ASSEMBLY GUIDES page 25. SIDE SHIELD MTL ASSY ELECTRIC CONTACT IS NECESSARY #C389 PEEL THE SEPARATOR AND PUSH THOROUGHLY TO STICK IT. ADHESION STRENGH: MORE THAN 0.49N(50gf) #C387 #C412 (d) x 3 #C350 1 ± 1 #C412 #C352 #352 #C410 #C411...
  • Page 60 D8UF FINAL ASSEMBLY GUIDES page 26. SIDE COVER ASS'Y #C385 P50S602, P50A402, P50A202 #C414 (f) x 3 #C414 (f) x 3 TABLE OF CONTENTS...
  • Page 61 D8UF WAVEFORMS The number icons thru the circuit schematic are reference to the next waveforms. The waveforms were taken with a color bar video signal and with an audio signal of 1Vp-p 1kHz. . Pin 8 of tuner, color bar, (page 75) .
  • Page 62 D8UF ... WAVEFORMS (continued) . RH43 Component Main Y(page 76) . RH42 Component Main Pb (page 76) . RH41 Component Main Pr (page 76) TABLE OF CONTENTS...
  • Page 63 D8UF Schematic Diagram page MAIN BOARD SHEET: 001 Slow Bus/Flash TABLE OF CONTENTS...
  • Page 64 D8UF Schematic Diagram page fm sheet 10(VCXO) to sheet 7(Seine 2A) to sheet 10(VCXO) (DEMODULATOR) MAIN BOARD SHEET: 002 Peripherals TABLE OF CONTENTS...
  • Page 65 D8UF Schematic Diagram page frm Sheet 12(Power) frm Sheet 12(Power) MAIN BOARD SHEET: 003 DDR I/F TABLE OF CONTENTS...
  • Page 66 D8UF Schematic Diagram page from Sheet 12(Power) from Sheet 12(Power) from Sheet 13(Sub-cpu) from Sheet 12(Power) from Sheet 13(Sub-cpu) from Sheet 13(Sub-cpu) from Sheet 13(Sub-cpu) from Sheet 13(Sub-cpu) to/from Sheet 13(Sub-cpu) from Sheet 13(Sub-cpu) to/from Sheet 13(Sub-cpu) to/from Sheet 13(Sub-cpu) MAIN BOARD SHEET: 004 HDMI I/F TABLE OF CONTENTS...
  • Page 67 D8UF Schematic Diagram page MAIN BOARD SHEET: 006 Seine2A/Video in TABLE OF CONTENTS...
  • Page 68 D8UF Schematic Diagram page from sheet 2(Seine 2A) from sheet 8 (TS Video in) from sheet 2(Seine 2A) from sheet 12 (Power) MAIN BOARD SHEET: 007 Seine 2A/Video Out TABLE OF CONTENTS...
  • Page 69 D8UF Schematic Diagram page from Sheet 7(Seine 2A Video out) from Sheet 14(Tuner/demodulator) MAIN BOARD SHEET: 008 TS Video In TABLE OF CONTENTS...
  • Page 70 D8UF Schematic Diagram page From Sheet 8(TS Video in) From Sheet 10(PLL) from Sheet 12(Power) MAIN BOARD SHEET: 009 Video Out, Panel I/F TABLE OF CONTENTS...
  • Page 71 D8UF Schematic Diagram page sheet 11 MAIN BOARD SHEET: 010 VCXO, PLL TABLE OF CONTENTS...
  • Page 72 D8UF Schematic Diagram page to sheet 12(Power) to sheet 2(Seine 2A) from sheet 12(Power) from sheet 12(Power) from Sheet 16 to sheet 17(Terminal) from Sheet 17 to sheet 12 (Power) from sheet 12(Power) from Sheet 12(Power) from sheet 12(Power) from sheet 2 from sheet 12(Power) from sheet 10 from sheet 12(Power)
  • Page 73 D8UF Schematic Diagram page to sheet 14(Tuner/demodulator) to sheet 4(HDMI I/F) to sheet 3(DDR I/F) to sheet6(Seine 2A) to sheet7(Seine 2A/Video in) to sheet 6(Seine 2A/Video in) to sheet 3(DDR I/F) MAIN BOARD SHEET: 012 Power TABLE OF CONTENTS...
  • Page 74 D8UF Schematic Diagram page to sheet 2(Seine 2A) to sheet 1 from sheet 14(Tuner) sheet 16 (sheet 18) from sheet 16 (AV switch) MAIN BOARD SHEET: 013 Sub-Micro TABLE OF CONTENTS...
  • Page 75 D8UF Schematic Diagram page to sheet 16(AV switch) MAIN BOARD SHEET: 014 Tuner/Demodulator TABLE OF CONTENTS...
  • Page 76 D8UF Schematic Diagram page from sheet 17 To sheet 6(Seine 2A/Video in) MAIN BOARD SHEET: 016 AV Switch TABLE OF CONTENTS...
  • Page 77 D8UF Schematic Diagram page MAIN BOARD SHEET: 017 Terminal TABLE OF CONTENTS...
  • Page 78 D8UF Schematic Diagram page from sheet 13(Sub-cpu) MAIN BOARD SHEET: 018 TABLE OF CONTENTS...
  • Page 79 D8UF Schematic Diagram page from sheet 13(Sub-cpu) MAIN BOARD SHEET: 018 TABLE OF CONTENTS...
  • Page 80 D8UF Schematic Diagram page to sheet 2 to sheet 2 to sheet 2 MAIN BOARD SHEET: 029 TABLE OF CONTENTS...
  • Page 81 D8UF Schematic Diagram page to sheet 13 (Sub-cpu) SUB BOARD SHEET: 01 TABLE OF CONTENTS...
  • Page 82 D8UF Schematic Diagram page to sheet 13 (Sub-CPU) SUB BOARD SHEET: 02 CONTROL TABLE OF CONTENTS...
  • Page 83 D8UF PRINTED CIRCUIT BOARDS page Main Printed Circuit Board P50S602, P50A402, P50A202 Top layer ‘A’. TABLE OF CONTENTS...
  • Page 84 D8UF PRINTED CIRCUIT BOARDS page Main Printed Circuit Board P50S602, P50A402, P50A202 Bottom layer ‘H’. TABLE OF CONTENTS...
  • Page 85 D8UF PRINTED CIRCUIT BOARDS page Control Printed Circuit Board P50S602, P50A402, P50A202 Top layer ‘A’ Control Printed Circuit Board P50S602, P50A402, P50A202 Bottom layer ‘D’ TABLE OF CONTENTS...
  • Page 86 D8UF PRINTED CIRCUIT BOARDS page LED Printed Circuit Board P50S602, P50A402, P50A202 Top layer ‘A’ LED Printed Circuit Board P50S602, P50A402, P50A202 Bottom layer ‘D’ TABLE OF CONTENTS...

  • Page 87: Part List

    D8UF PART LIST For P50S602/P50A402 and P50A202 models SYMBOL PART No. DESCRIPTION SYMBOL PART No. DESCRIPTION BOARD ASSEMBLIES SUB PWB ASSEMBLY MISCELLANEOUS 0 0 0 0 0 0 JP63872 PSA D8UF SUB-B E901 EP00342 AC INNLET 10DKDG3S MFAN1 GS01592 FAN (DC MOTOR:DC3110RL-04W-S19-C06) MAIN PWB ASSEMBLY MFAN1 GS00696...
  • Page 88 PANEL-DD02662 D8UF ALL ABUS PWB P50S602 MODEL MAIN PARTS VIEW PART OF PANEL ABUS-UL FAN1 Power supply FAN2 ABUS-UC ABUS-UR GS01592 HA02602 GS01591 LOGIC FPF51R- LGC61712 X-BUS-U FPF51R- SDR-U XBU61781 FPF51R-SDR62961 X-SUS board FPF51R- XSS61761 Y-SUS FPF51R-YSS61771 X-BUS-D FPF51R- XBD61791 SDR-D FPF51R-SDR62971 Control...
  • Page 89 PANEL-DD02612 D8UF ALL ABUS PWB P50A402/202 MODEL MAIN PARTS VIEW PART OF PANEL Power supply FAN2 LOGIC HA02592 GS00696 FPF49R-LGC58672 SDR-U FPF49R-SDU61481 X-SUS board FPF49R- XSS63991 Y-SUS FPF49R-YSS64001 SDR-D FPF49R-SDD61491 Control board JP63872 IR/LED board Main Board AC inlet SPK-R SPK-L JP63872 UX34844...
  • Page 90 D8UF P50S602 Connector repair parts of the Panel. 50PF3 Power cable 50PF3 Signal cable 50PF3 Power cable 50PF3 Signal cable 50PF3 Signal cable 50PF3 Power cable 50AE2 Power cable 50PF3 Signal cable 50PF3 Power cable 50PF3 Signal cable 50PF3 Signal cable 50PF3 Signal cable 50PF3 Signal cable TABLE OF CONTENTS...
  • Page 91 D8UF P50A402, P50A202 Connector repair parts of the Panel. 50AE2 Power cable 50AE2 Signal cable 50AE2 Power cable 50AE2 Signal cable < Top side of PWB > 50AE2 Power cable < Bottom side of PWB > 50AE2 Power cable (2 pieces) 50AE2 Power cable 50AE2 Signal cable 50AE2 Power cable...
  • Page 92 PA NO. 0235 MADE IN MEXICO...

This manual is also suitable for:

P50a202/d8ufP50a402/d8uf

Table of Contents