Table of Contents
Quick Links
Table of Contents
Related Manuals for Black & Decker BDCHD18SC1
Summary of Contents for Black & Decker BDCHD18SC1
- Page 1 BDCHD18 www.blackanddecker.com.au www.blackanddecker.co.nz...
-
Page 3: Intended Use
(Original instructions) ENGLISH Intended use f. If operating a power tool in a damp location is Your BLACK+DECKER BDCHD18 impact drill, has been unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of designed for screwdriving applications and for drilling in wood, electric shock. - Page 4 (Original instructions) ENGLISH c. Disconnect the plug from the power source and/or e. Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit remove the battery pack, if detachable, from the power unpredictable behaviour resulting in fire, explosion or risk tool before making any adjustments, changing accessories, or storing power tools.
-
Page 5: Residual Risks
(Original instructions) ENGLISH When assessing vibration exposure to determine safety Safety Instructions When Using Long Drill Bits measures required by 2002/44/EC to protect persons regularly Never operate at higher speed than the maximum using power tools in employment, an estimation of vibration speed rating of the drill bit. - Page 6 (Original instructions) ENGLISH Electrical safety Installing and removing the battery pack from the tool (fig. B) Your charger is double insulated; therefore no Warning! Make certain the lock-off button is engaged to earth wire is required. Always check that the prevent switch actuation before removing or installing battery.
-
Page 7: Troubleshooting
(Original instructions) ENGLISH Grasp the rear half of the chuck (4) with one hand and use Minimize stalling on breakthrough by reducing pressure your other hand to rotate the front half in the counterclock- and slowly drilling through the last part of the hole. wise direction, as viewed from the chuck end. -
Page 8: Maintenance
(Original instructions) ENGLISH Maintenance 905902** Charger Your BLACK+DECKER tool has been designed to operate Input voltage over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool Output voltage care and regular cleaning. Current Your charger does not require any maintenance apart from Hours... -
Page 9: Ec Declaration Of Conformity
(Original instructions) ENGLISH EC declaration of conformity Australia & New Zealand Stanley Black & Decker MACHINERY DIRECTIVE www.blackanddecker.com.au www.blackanddecker.co.nz Tel.1800 338 002 (Aust) or Tel. 0800 339 258 (NZ) 810 Whitehorse Road Box Hill VIC 3128, Australia BDCHD18 - Impact drill Black &... - Page 12 12/2021 NA005177...