(Video Menu Mode Only); Adjusting Picture Quality; Adjusting Color Temperature - JVC DLA-G150CLU Operating Instructions Manual
Hide thumbs
Also See for DLA-G150CLU:
- Operating instructions manual (80 pages) ,
- Instructions manual (160 pages)
Table of Contents
Adjusting Picture Quality
In the "Image adj." submenu, adjust brightness, contrast, sharpness, etc. to obtain the desired picture quality. Note that the
adjustment items differ in Video menu mode and PC menu mode.
1
Press the MENU button.
The main menu appears on the screen.
2
Select "Image adj." with the cursor button 5 5 5 5 or ∞ ∞ ∞ ∞ , and press 3 3 3 3 or the ENTER button.
The "Image adj." submenu appears on the screen.
Video submenu
Image adj.
Contrast
12
Brightness
12
Color
12
Tint
12
Sharpness
1
All reset
ENTER
3
Select the item to be adjusted with the cursor button 5 5 5 5 or ∞ ∞ ∞ ∞ .
*"Color" and "Tint" are shown in Video submenu only.
4
Make adjustment with the cursor 2 2 2 2 or 3 3 3 3 .
*To adjust multiple items, repeat 3 and 4.
Adjustment item
Button
2 or 3
Gets lower/higher. (–30 ↔ 0* ↔ +30)
Contrast
Gets darker/brighter. (–30 ↔ 0* ↔ +30)
2 or 3
Brightness
Gets softer/deeper. (–30 ↔ 0* ↔ +30)
2 or 3
Color
(Video menu mode only)
Gets reddish/greenish. (–30 ↔ 0* ↔ +30)
2 or 3
Tint
(Video menu mode only)
Gets softer/sharper.
• Video menu mode: (–5 ↔ 0* ↔ +5)
• PC menu mode: (1 ↔ 3* ↔ 5)
2 or 3
Sharpness
Note
• When in the PC menu mode, if the resize function in the PC submenu is set to
"1:1", the image quality will not change even if the value is changed.
Resets above items to the factory set values. How to operate is mentioned below
All reset
ENTER
(next page).
* : Factory set value
To perform All Reset
• In the Image adj. submenu, select "All reset" with the cursor button 5 or ∞, and press the ENTER button. Then, the "All
reset" submenu appears on the screen.
• Press the cursor button 2 to select "Yes", and then press the ENTER button.
• All items in the "Image adj." submenu are reset to the factory set values and the menu returns to the previous one.
To exit the "All reset" submenu without performing All reset, select "No" with the cursor button 3 and, press the ENTER
button.
(To be continued on the next page)
All manuals and user guides at all-guides.com
Menu Operations
PC submenu
Image adj.
Contrast
12
Brightness
12
Sharpness
1
2
3
4
5
All reset
ENTER
Adjustment content
49
Menu Operations
.
Image adj.
All reset?
Yes
No
5
Press the EXIT button to return to the previous menu or press the MENU button to
exit the menu mode.
Memo
In some adjustments, the level bar changes according to the set value. (The setting value is also displayed at the left of the
level bar.)
Adjusting Color temperature
1
Press the MENU button.
The main menu appears on the screen.
2
Select "Color temp." with the cursor button 5 5 5 5 or ∞ ∞ ∞ ∞ , and press 3 3 3 3 or the ENTER
button.
The "Color temp." submenu appears on the screen.
3
Select "Color temp." with the cursor button 5 5 5 5 or ∞ ∞ ∞ ∞ .
4
Adjust the color temperature with the cursor button 2 2 2 2 or 3 3 3 3 .
Low:
Color temperature decreases (image becoming reddish).
Middle:
Results in middle color temperature. (Factory set position).
High:
Color temperature increases (image becoming blueish).
5
Select "RED" or "GREEN" or "BLUE" with the cursor button 5 or ∞ ∞ ∞ ∞ .
6
Fine adjust the color temperature with the cursor button 2 2 2 2 or 3 3 3 3 .
To adjust multiple items, repeat 5 and 6.
Adjustment item
Button
2 or 3
RED
Adjusts the red level. (0 to 255)
2 or 3
GREEN
Adjusts the green level. (0 to 255)
2 or 3
BLUE
Adjusts the blue level. (0 to 255)
To perform All Reset
• In the Color temp. submenu, select "All reset" with the cursor button 5 or ∞, and press the ENTER button. Then, the "All
reset" submenu appears on the screen.
• Press the cursor button 2 to select "Yes", and then press the ENTER button.
• All items in the Color temp. submenu are reset to the factory set values and the menu returns to the previous one.
To exit the "All reset" submenu without performing All reset, select "No" with the cursor button 3 and, press the ENTER
button
7
Press the EXIT button to return to the previous menu or press the MENU button to
exit the menu mode.
50
Adjustment content
Chapters
Table of Contents
Troubleshooting
