Table of Contents
Quick Links
Table of Contents
Related Manuals for Black & Decker BDCCS18C1
Summary of Contents for Black & Decker BDCCS18C1
- Page 1 BDCCS18 www.blackanddecker.com.au www.blackanddecker.co.nz...
- Page 4 ENGLISH (Original instructions) 20 21...
-
Page 5: Intended Use
(Original instructions) ENGLISH Intended use 3. Personal safety a. Stay alert, watch what you are doing and use common Your BLACK+DECKER BDCCS18 Circular saw has been sense when operating a power tool. Do not use a designed for sawing wood and wood products. This tool is intended for consumer use only. -
Page 6: Cutting Procedures
ENGLISH (Original instructions) e. Maintain power tools. Check for misalignment or g. Always use blades with correct size and shape binding of moving parts, breakage of parts and any (diamond versus round) of arbour holes. Blades that other condition that may affect the power tools do not match the mounting hardware of the saw will run operation. -
Page 7: Lower Guard Function
(Original instructions) ENGLISH Saw blades f. Blade depth and bevel adjusting locking levers must be tight and secure before making cut. If blade Do not use blades of larger or smaller diameter than adjustment shifts while cutting, it may cause binding and recommended. - Page 8 ENGLISH (Original instructions) Loosen the depth adjustment knob (6) to unlock the If the supply cord is damaged, it must be replaced by the saw shoe (5) as shown in figure F. manufacturer or an authorised BLACK+DECKER Service Move the saw shoe into the desired position. The Centre in order to avoid a hazard.
-
Page 9: Blade Selection
(Original instructions) ENGLISH Lower Blade Guard Switch WARNING: Laceration Hazard. The lower blade guard is Saw is equipped with a switch lock-off feature to prevent a safety feature which reduces the risk of serious personal unintentional operation. injury. Never use the saw if the lower guard is missing, dam- To operate the tool, press in on the lock-off button (2) from aged, misassembled or not working properly. -
Page 10: Troubleshooting
ENGLISH (Original instructions) Protecting the environment Remove hand from guard lever and firmly grip secondary Separate collection. This product must not be arm to allow you to resist kickback if it occurs. disposed of with normal household waste. Make sure blade is not in contact with cutting surface before starting saw. - Page 12 Australia & New Zealand Stanley Black & Decker www.blackanddecker.com.au www.blackanddecker.co.nz Tel.1800 338 002 (Aust) or Tel. 0800 339 258 (NZ) 90624570 05/2015...