Table of Contents
2. TRANSPORT AND PACKING
The cutting unit is delivered in a carrying case, inside which there are various options. The
code of the ordered product and its serial number are indicated outside the package (see
picture 1). The following accessories are contained in a bag inside the package:
1)
Poligonal blade;
2)
Butterfly wrench for blade nut disassembly;
3)
Drift for blade disassembly.
3. PLATE DATA
The manufacturer's identification and EC STANDARD 2006/42/EC conformity plate (see picture
below) is located on the front part of the cutting unit.
The plate must not be removed at all, even if the machine is resold. Always refer to
the serial number written on the plate itself when contacting the manufacturer.
Several safety warnings are printed on a card which is applied to the cutting unit feeding
cable; such warnings must be strictly followed by everyone dealing with the machine. The
company is not to be held responsible for damage to property or accidents to
people which might occur if the above-mentioned warnings are not observed. In
such a case, the operator is the only person responsible.
Model
GRT12M
Electric data
400
1
Serial number
MM_______
0,52
180
Year of production
2___
1
2
R EAD
T H E
INSTRUCTION
MANUAL
U S E
METAL
GLOVES
U S E
GOGGLES
EN
3
2
SHEARING
R ISK
DO NOT
REMOVE
T H E
SAFET Y
D EVICES
HIGH
VOLTAGE
21
Table of Contents
