Table of Contents
1 Preparation to Print
1.4 Connecting AC Adapter (Charging)
The battery is charged by the printer's built-in charger.
Caution
Please stop charging immediately if an abnormal charge is generated.
1. Please connect the AC cable with the
AC adapter, and connect the AC plug to
an outlet.
2. Please open the jack cover.
Insert DC output terminal of AC
adapter into the AC adapter jack.
3. When the charge starts, the LED turns orange, and when the
battery is fully charged, the LED turns off. Please refer to chapter
3.3 for the LED display of charging status.
4. Please hang the hook of the jack cover
to the hole of AC jack, and push center
of the jack cover to close.
20
AC cable
AC adapter Jack
AC adapter
Jack
Cover
Jack
Cover
Table of Contents
