Table of Contents
Quick Links
Table of Contents
Related Manuals for Fujitsu FTP-628WSL210 Series
Summary of Contents for Fujitsu FTP-628WSL210 Series
- Page 1 Mobile Printer FTP-628WSL210 Series User's Guide FUJITSU COMPONENT LIMITED...
- Page 3 Thank you for purchasing the FTP-628WSL210 Series Mobile Printer (hereafter referred to as “this product”). This User's Guide (hereafter referred to as “this guide”) contains precautions to use it safely and correctly. Before using this product, please be sure to read complete this guide to use it correctly.
- Page 4 Therefore do not use this product for a high safety application. If you are not certain whether this device is in a high safety application category, contact Fujitsu Component Ltd. sales personnel prior to use. We shall take no responsibility for any damage caused by the use of this product in a high safety application.
- Page 5 ■ Regulatory Compliance For Customers in USA (FCC) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation.
- Page 6 For Customers in CANADA (Industry Canada) This equipment complies with Industry Canada RSS210 rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. For Customers in EU (CE Marking) This product is in conformance with the requirements of European Council Directive:...
- Page 7 ■ Meaning of Symbols The following symbols are used in this guide. Please understand well the meaning of each symbol and read this guide. Indicates possibility of causing severe Warning personal injury or death if not used properly. Indicates that a minor or some personal injury may occur or that the product itself or other userʼs Caution property may be damaged.
- Page 8 ■ Generic Precautions Warning - Do not burn or heat. Failure to observe this may cause smoke or fire or Fire breakdown. - Do not pour water. This equipment is not waterproof. Failure to observe this Fire may cause fire or burst or breakdown. - Do store equipment...
- Page 9 Caution - Do not use direct sun or dusty place that contains the oil and iron. Fire Failure to observe this may cause heat, fire, or failure. - If charging is not completed beyond the predetermined charging time, unplug the charger, please stop the Fire charge.
- Page 10 ■ Printer Warning - Do not put metal objects or flammable objects into the gaps of the case. Fire Failure to observe this may cause fire, or electric shock. - Do not use the printer in a location that is prohibited the generation of radio waves.
- Page 11 ■ Battery Warning - Do not use other than the specified battery. Failure to observe this may cause fire, or electric shock. Fire - Do not charge the battery in the charger other than the specified. Fire Failure to observe this may cause fire, destruction. - Do not short-circuit the electrode of the battery.
- Page 12 ■ AC Adaptor Warning - Do not connect other than the specified voltage or/and frequency. Fire Failure to observe this may cause fire or electric shock due to cable disconnection. - Do not use other than the specified AC adaptor. Failure to observe this may cause heat, fire, or destruction.
- Page 13 ■ Warning Label of Product This product is stuck label on the following alarm displays. This label must not peel off or erase the displays. Moreover, please contact the distributor when becoming difficult to see the display due to dirt etc. Warning display Contents HEAD...
-
Page 14: Table Of Contents
1 Kinds of Product..............13 2 Preparation to print ............14 Packing item ............14 Option Items ............15 Part Names .............16 Inserting the Battery ..........19 Connecting AC Adaptor(Charging)......20 Connecting AC Adaptor(Operating) ......21 Setting Paper............22 Setting Belt Fixture ..........23 3 Operating Procedures ............24 Turning On..............24 Test Print ..............25 USB Communication..........27 Bluetooth Communication .........28... -
Page 15: Kinds Of Product
1 Kinds of Product There are the following kinds of the product. Please note that the printer may not support the function by the printer model, even if there is a description in this guide. MODEL NAME F T P - 6 2 8 W S L 2 1 0 # 2 0 - R a : Supply item (Refer to Table 1-1) b : Interface... -
Page 16: Preparation To Print
2 Preparation to print 2.1 Packing item The following are attached to this product. Please open the box and confirm to item in the box. If it is insufficient, please ask the distributor. Printer Battery AC adaptor Precautions Guide... -
Page 17: Option Items
2 Preparation to print 2.2 Option Items To use this product better, the following and optional parts are prepared. Please confirm how to buy to the Acquisition origin of this product. Paper Battery AC adaptor AC cable USB cable Belt Fixture (PSE or UL/CSA) -
Page 18: Part Names
2 Preparation to print 2.3 Part Names ■ Front Side (Cover Close) Paper Cover : This is opened and paper is set. Paper Cutter : To cut paper. Status LED : The state of printer is displayed. POWER Switch : To turn the power supply on or off. FEED Switch : To feed paper. - Page 19 2 Preparation to print ■ Front Side (Cover Open) Platen Roller : To feed paper. Warning Label : This shows warning when using printer. Thermal Head : This applies heat to paper. Paper Sensor : This sensor detects the state of paper.
- Page 20 2 Preparation to print ■ Rear Side Screw for Belt Fixture : This fixes Belt Fixture. AC Adaptor Connector : This is opened and AC adaptor is connected. Product Label : Printer Type and etc are displayed.
-
Page 21: Inserting The Battery
2 Preparation to print 2.4 Inserting the Battery Caution Life of the battery charging is about 500 times. (At the normal temperature) If the degradation battery is used, not only the equipment malfunctions but also destruction might be caused. 1. Please open the battery cover by pushing the lock of the battery cover and pulling the cover forward. -
Page 22: Connecting Ac Adaptor(Charging)
2 Preparation to print 2.5 Connecting AC Adaptor(Charging) The battery is charged by the charger capability with built-in this printer. Caution Please stop charging at once if an abnormal charge is generated. 1. Please connect the AC cable with the AC adaptor, and connect the AC plug with the outlet. -
Page 23: Connecting Ac Adaptor(Operating)
2 Preparation to print 2.6 Connecting AC Adaptor(Operating) This product can be operated also with the AC adaptor. 1. Please connect the AC cable with the AC adaptor, and connect the AC plug with AC cable AC adaptor the outlet. 2. -
Page 24: Setting Paper
2 Preparation to print 2.7 Setting Paper 1. Please open the paper cover by pushing the cover open lever in the direction of the arrow and going up. Cover Open Lever Thermal Paper (Thermosensitive Side) 2. Please set the paper in the printer. -
Page 25: Setting Belt Fixture
2 Preparation to print 2.8 Setting Belt Fixture The printer can be attached to the waist belt with belt fixture of optional parts. The belt fixture is recommended to be attached with the following directions. How to attach it 1. Please remove the screw for the belt fixture on the printer bottom surface. -
Page 26: Operating Procedures
3 Operating Procedures 3.1 Turning On 1. Please keep pushing the POWER Switch until lighting to green the State LED. 2. It is possible to turn off power by keeping pushing the POWER Switch until the State LED is turned off. -
Page 27: Test Print
3 Operating Procedures 3.2 Test Print This product has the test print function. The setting of the printer can be confirmed in this test print. 1. Please turn off the power and push the FEED switch. 2. Please turn on power with the FEED switch pushed. Then, the test print starts. - Page 28 3 Operating Procedures Checked pattern The thermal head open circuit etc. can be confirmed. Version The firmware version can be confirmed. ---------------- Setting information etc 628AD Ver 1.00 ---------------- The setting information etc can be confirmed. This print example Serial No : 22000001 is the following content.
-
Page 29: Usb Communication
3 Operating Procedures 3.3 USB Communication It explains the example of the connection method in the USB communication to print it from the terminal like a personal computer as follows. 1. Please prepare the USB cable. The plug on the printer side (device side) is mini B type. -
Page 30: Bluetooth Communication
3 Operating Procedures 3.4 Bluetooth Communication It explains the example of the connection method in the Bluetooth communication to print it from the terminal like a personal computer as follows. 1. Please turn on the power of printer. 2. Please search the Bluetooth device by the application in the host terminal. -
Page 31: Printer Error
3 Operating Procedures 3.5 Printer Error The error occurs when the printer cannot print/work normally. The category of error is notified by the LED and the communication when the error is occurring. Please return to normally status by removing the cause when the error is occurring. - Page 32 3 Operating Procedures Error Cause Solution Supply Voltage - The residual quantity - Please charge Error of the battery has the battery. decreased. - Please exchange - The AC adaptor is out the AC adaptor. of order. (At the AC adaptor operation) Mark - The mark of paper is...
-
Page 33: Indicator Lights
4 Indicator Lights The state of the printer error and the battery residual quantity is confirmed by the LED display. Important It may be difficult to see the LED display in a bright place under direct sunshine etc. 4.1 Normal Operation LED Indications (LED Symbol ○... -
Page 34: Printer Error
4 Indicator Lights 4.2 Printer Error LED Indications (LED Symbol ○ :Lighting, ● :Blinking) Printer Status Blink Cycle (Unit [msec]) Gree n Ora nge Re d ● Paper End 1time O FF 1000 ● Paper Cover Open O FF 10 00 2times Thermal Head... -
Page 35: Charging
4 Indicator Lights 4.3 Charging LED Indications (LED Symbol ○ :Lighting, ● :Blinking) Printer Status Blink Cycle (Unit [msec]) Gree n Ora nge Re d Chargeing ○ O FF Charging Full Charge O FF Chargin g Full charge Charge Error (Over charge, ●... -
Page 36: Maintenance
5 Maintenance Please maintain this printer regularly. Caution - Do not do the maintenance task for the printer with including the battery or connecting the AC adaptor. - Do not absolutely maintain, disassemble and repair the part not explaining in this chapter. 5.1 Thermal Head Please maintain the thermal head once a month. -
Page 37: Platen Roller
5 Maintenance 5.2 Platen Roller Please maintain the platen roller once a month. 1. Please open the paper cover. (Refer to chapter 2.7) 2. Alcohol is soaked into the soft one such as cotton buds, and it wipes it gently until the thermal head is cleaned. Please use IPA on the market for alcohol. -
Page 38: Paper Cover
5 Maintenance 5.4 Paper Cover If the paper cover came off, please repair according to the following procedures. 1. Please push the opening and closing fulcrum of the paper cover to the printer with the paper cover opened, and it connects the printer. -
Page 39: Power/Feed Switch
5 Maintenance 5.5 POWER/FEED Switch If the Power switch or the FEED switch came off, please repair according to the following procedures. 1. Please push switch to be suitable for a quadrangle on the switch side and for hole of the case Switch side. -
Page 40: Troubleshooting
6 Troubleshooting ■ Power Problem Cause Solution Printer does not Is there a battery? or Please set the battery turn on Isn't it reversed? correctly. (C. 2.4) Is the battery charged Please charge enough? the battery. (C. 2.5) Is the POWER Switch Please push the POWER correctly pushed? Switch correctly. - Page 41 6 Troubleshooting ■ Communication Problem Cause Solution Printer does not Is not the power turned Please turn on the communicate off? power. (C. 3.1) Is the application or the Please use the driver for this product application or the driver used? for this product.
- Page 42 6 Troubleshooting ■ Print Problem Cause Solution Printer does not Is not the power turned Please turn on the paper feed off? power. (C. 3.1) Is the paper correctly Please set the paper Paper jam set? correctly. (C. 2.7) occurrs Is the paper cover Please close the paper closed?
- Page 43 6 Troubleshooting ■ Others Problem Cause Solution Print starting Does the mark detection Please remove the location is operate correctly? cause of the mark incorrect (C. 4.2) detection error. (C. 3.5) Printing is slow Isn't the remainder of the Please charge battery a little? the battery.
-
Page 44: Specifications
7 Specifications 7.1 Printer specifications Items Contents Print Method Thermal Line-dot Printing Resolution 8dot/mm（203dpi） Dimensions 84×136.5×43.6mm Weight About 220g Including a battery, Excluding a paper Max Print Width About 48mm Print Speed Max 40mm/sec Battery full charge, Print ratio 12.5% Character Alphanumeric, Katakana : 8x16, 16x16, 12x24, 24x24... -
Page 45: Paper Specifications
7 Specifications 7.2 Paper specifications Items Contents Type Thermal Roll Paper Widht Outer Up to φ36mm Diameter Inner φ 8mm or more Diameter Thickness 60 to 80μm Specified Type Name Manufacture Paper High Sensitive TF50KS-E4 Nippon Paper Group Standard Paper TF60KS-E Nippon Paper Group PD150R Oji Paper Group... -
Page 46: Recycle
8 Recycle This symbol means: Do not dispose of this product together with your household waste! Please refer to the information of your local community or contact our dealers regrading the proper handling of end-of-life electric and electronic equipments. Recycling of this product will help to conserve natural resources prevent... -
Page 47: Appendix
Moreover, when you request the breakdown and the repair, please tell us the model name and the product serial number in addition to information on the symptom etc. Technical Support Section FUJITSU COMPONENT LIMITED (Japan) Global Marketing Dept.2 Tel: +81-3-5449-7014 Fax: +81-3-5449-2628 E-mail: [email protected]... -
Page 48: Bluetooth Communication
9 Appendix 9.2 Bluetooth Communication (1) Android Terminal 1. Please turn on the power of printer. 2. Please open "Settings" - " WIRELESS ＆ NETWORKS" from the menu of terminal, and turn on Bluetooth. 3. Please open the "Bluetooth”, and tap "FTP-628WSL…". (Please tap "SEARCH FOR DEVICES", if it does not appear) 4 Please input the PIN code, and tap "OK". - Page 49 9 Appendix (2) iOS Terminal 1. Please turn on the power of printer. 2. Please open "Settings" - "General" - "Bluetooth" from the menu of terminal, and turn on Bluetooth. 3. Please tap "FTP-628WS…" from "Devices". 4. Please input the PIN code, and tap "Pair". PIN code is "9999"...
- Page 51 Mobile Printer FTP-628WSL210 Series User's Guide L0NA02265-L11802RS Pablished by FUJITSU COMPONENT LIMITED Aug, 2012 Rev 1...