Table of Contents
2.4 ASSEMBLY AND DISASSEMBLY OF [8]VF ASSEMBLY
2.4.1 Disassembly of VF ASSEMBLY
(1) Remove the EYE CUP.
(2) Remove the four screws (1 to 4) and then remove the COV-
ER (VF).
(3) Remove the two screws (5 and 6) and then remove the
FPC BOARD from the hook attaching the FPC BOARD.
NOTE 8a:
During the procedure, be careful not to damage the FPC.
When attaching the SW BOARD ASSEMBLY, attach the
SW BOARD ASSEMBLY so that the SW BOARD AS-
SEMBLY comes upwards.
(4) Remove the four screws (7 to 10), and then pull out and re-
move the FPC from the VF HINGE ASSEMBLY.
NOTE 8b:
During the procedure, be careful not to damage the FPC
and the SWITCH.
(5) Remove the five screws (11 to 15).
(6) Remove the UPPER CASE(VF) R.
(7) Remove the UPPER CASE(VF) F and then pull out the
LENS SA and the LCD UNIT ASSEMBLY with the FPC.
NOTE 8c:
In attaching the LCD UNIT ASSEMBLY, put the projec-
tions of the LCD UNIT ASSEMBLY in the slots of the
BOTTOM CASE(VF). Put the STOPPER of the FPC in-
side the BOTTOM CASE(VF). In attaching the UPPER
CASE(VF) F and the UPPER CASE(VF) R, attach the
UPPER CASE(VF) F first and then the UPPER
CASE(VF) R and be careful to keep the FPC inside the
BOTTOM CASE(VF).
2.4.2 Disassembly of the LENS SA
(1) Remove the LEVER(LENS).
(2) Remove the SHEET(LENS).
(3) Remove the LENS ASSEMBLY from the GUIDE
LENS(VF).
NOTE 8d:
Be careful not to lose the SPRING(LENS).
GUIDE LENS(VF)
LENS ASSEMBLY
SHEET(LENS)
SPRING(LENS)
NOTE8d:
1-12 (No.86733)
LCD UNIT ASSEMBLY
FPC
LEVER(LENS)
Fig.2-4-2
1
(S8a)
EYE CUP
(S8b)
NOTE8b
EYE CUP
9
10
(S8c)
(S8c)
12
(S8c)
(S8c)
11
(S8c)
15
14
(S8c)
(S8c)
L8c
UPPER CASE(VF)R
LCD UNIT
ASSEMBLY
LENS SA
L8b
Fig.2-4-1
2
(S8a)
COVER(VF)
4
(S8a)
3
(S8a)
5
(L8a)
NOTE8a
FPC
6
(S8b)
FPC
8
7
(S8a)
(S8a)
VF HINGE
ASSEMBLY
13
UPPER CASE(VF)F
FPC
NOTE8c
NOTE8c
BOTTOM CASE(VF)
Table of Contents
