Table of Contents
1.6 DISASSEMBLY OF 9 E. VF ASSEMBLY
1.6.1 9E. VF assembly
9
Note
a: When disassembling the E VF assembly, remove
the frame (VF) from the case/cap assembly de-
pending on the situation.
9
Note
b: Be very careful not to get the inside of the VF
soiled or dusty during and after disassembling the
E. VF assembly.
9
Note
c: After the screw having the loose-proof tip was
once removed from the E. VF assembly, don't re-
use it.
1. Remove the eyecup and pull out the guide (VF).
2. Draw the frame (VF) out of the case assembly.
3. Remove the screw (1) first and then lever (VF).
4. Remove the three screws (2-4) and draw out the eye-
piece sub assembly.
B/L SUB ASSY
NOTE
d
9
FFC
FRAME(VF)
NOTE
1-10
NOTE
CASE/CAP
NOTE
e
9
(L
9
a)
(L
b)
9
CN
a
9
NOTE
f
9
LCD MODULE
a
9
Fig. 1-6-1
5. Remove the screw (5) first and then LCD module/holder
(LCD).
9
Note
d: Pay heed to the FFC not to damage it during the
removing work.
6. Get the two hooks (L9a, L9b) disengaged and then re-
move the holder (LCD)
9
Note
e: Carefully proceed with the above-mentioned work
not to damage any part.
7. Disconnect the connector (CN9a) and remove the LCD
module.
9
Note
f: Pay heed the parts not to damage any thing.
EYE PIECE
SUB ASSY
GUIDE(VF)
a
9
2
6
7
CAP
(VF)
5
3
4
1
HOLDER
(LCD)
: 0.069N·m (0.7kgf·cm)
: 0.098N·m (1.0kgf·cm)
EYE CUP
Table of Contents
