GE Monogram ZEU304 Installation Instructions Manual

30" digital radiant cooktop

Quick Links

GE Monogram
Installation
Instructions
30" Digital
Radiant Cooktop
Model
ZEU304
®
Table of Contents
loading

Summary of Contents for GE Monogram ZEU304

  • Page 1 ® GE Monogram Installation Instructions 30" Digital Radiant Cooktop Model ZEU304...
  • Page 2: Table Of Contents

    This appliance must be properly grounded. See “Electrical Supply”, page 4. If you have questions concerning the Proper installation is the responsibility of the installation of this product, call the GE installer. Product failure due to improper ® Answer Center...
  • Page 3: Models Available

    Design Information Digital Radiant Cooktop ZEU304 This Monogram cooktop offer a smooth Models Digital Radiant Cooktop glass surface with bridgeburner to form an Available elongated heating area. A beveled glass edge provides a trimless appearance. 30" Dimensions & Clearances • The underside (recessed) dimensions are: 20-1/2"...
  • Page 4: Installation Preparation

    Installation Preparation Digital Radiant Cooktop • Drill and appropriate bits • Flat-blade screwdriver Tools & • Electric or hand drill • Wire strippers Materials • Pencil • 120/240 volt or 120/208 volt junction box. • Ruler • Electrical cable, 3-conductor or 4 conductor wire, as required Required •...
  • Page 5: Step 1: Cut The Opening

    Installation Preparation Digital Radiant Cooktop S tep Cut the 30" Min. Opening 19-1/4" Max. Junction 28-3/8" Max. 1-1/2" Min. Wall coverings, 2" Min. Caution: countertops and cabinets should withstand 200°F heat generated *A=30 inches minimum clearance between the top of the cooking surface and the bottom of by the cooktop.
  • Page 6: Installation

    Installation Digital Radiant Cooktop CAUTION CAUTION Step Potential risk of fire, reflective tape must be secured around countertop opening as Install shown. Cooktop Place Reflective Tape Within Gasket 1/2" of Approx. 1/8" Cutout From Edge • Foam gasket (supplied) is on the underside of the cooktop flange all the way around, approximately 1/8"...
  • Page 7: Step 4: Connect Electrical

    Installation Digital Radiant Cooktop Step Connect Electrical Verify that power is turned off at the source When connecting to a 3-conductor branch circuit: Connect cooktop flexible power cable to • Connect cooktop red lead to branch circuit junction box: red lead. •...
  • Page 8 To obtain specific information concerning any ® Monogram product or service, call GE Answer Center consumer information service at 800.626.2000—any time, day or night. For Monogram local ser vice in your area, call 1-800-444-1845.

This manual is also suitable for:

Monogram zeu304bwg

Table of Contents