Configuring User Profile And Home; Locking And Unlocking Buttons And Functions; Preset Values And Schedules; Using Preset Values - Daikin Altherma EHYHBH08AA User Reference Manual
Hide thumbs
Also See for Altherma EHYHBH08AA:
- Installation manual (28 pages) ,
- User reference manual (24 pages) ,
- Operation manual (13 pages)
Table of Contents
4 Operation
Setting
Consumed gas
To configure the contrast of the user interface
Prerequisite: You switched the permission level to Advanced end
user.
1 Go to [7.1.1]:
> User settings > Display > Contrast.
To configure the backlit LCD time of the user interface
Prerequisite: You switched the permission level to Advanced end
user.
1 Go to [7.1.2]:
> User settings > Display > Backlit LCD time.
4.6.6
Configuring user profile and home pages
To set a user profile
Prerequisite: You switched the permission level to Advanced end
user.
1 Go to [7.1.3]:
> User settings > Display > User profile.
2 Select a user profile and press
Possible user profiles
If user profile = Detailed, you can see and do more on the home
pages.
User profile
Basic
20.0°C
Actual temperature
Detailed
20.0°C
Actual temperature
Scheduled
Tue
17:30
To configure which home pages are made available to the
end user
Prerequisite: You switched the permission level to Advanced end
user.
1 Go to [7.1.4]:
> User settings > Display > Available home
pages.
Result: The home pages that are possible for your system
layout are listed.
2 Select a home page and press
3 Do one of the following:
▪ To display the home page, select Yes and press
▪ To hide the home page, select No and press
4.6.7
Locking and unlocking buttons and
functions
About locking and unlocking
You can use the following locking modes:
▪ Button lock: Locks all buttons to prevent children from changing
settings.
User reference guide
16
Possible units of measurement
▪ m³
▪ ft³
▪ kWh
.
Example
Mon
15:20
Room
Mon
15:20
Room
.
.
.
▪ Function lock: Locks a specific function to prevent people from
changing its settings.
Possible function locks
Lock
Room On/OFF
LWT On/OFF
Tank On/OFF
Temperature up/down
Quiet mode
Holiday
Operation mode
User settings
DHW On/OFF
To check if locking is active
1 Press
to go to one of the home pages.
2 If
is displayed, button lock is active.
Note: If you are on a home page and try to use a function that is
locked,
is displayed for 1 second.
To activate or deactivate button lock
1 Press
to go to one of the home pages.
2 Press
for more than 5 seconds.
To activate or deactivate a function lock
1 Press
to go to the menu structure.
2 Press
for more than 5 seconds.
3 Select a function and press
4 Select Lock or Unlock, and press
4.7
Preset values and schedules
4.7.1
Using preset values
About preset values
You can define preset values for multiple controls. Preset values
make it easy to use the same value in many places (schedules and
room temperature home page ( and )). If you later want to change
the value, you only have to do it in one place.
To define preset values
1 Go to [7.4]:
> User settings > Preset values.
2 Select for which control you want to define a preset value.
Example: Room temperature.
3 Select a preset value and press
(heating).
4 Select a temperature and press
Possible preset values
Control
Preset value
Room
Comfort
temperature
Eco
EHYHBH05AA + EHYHBH/X05+08AA + EHYKOMB33AA
If active, people cannot...
Turn ON or OFF the room
temperature control.
Turn ON or OFF the leaving
water temperature (main +
additional) control.
Turn ON or OFF the domestic
hot water control.
Adjust temperatures.
Use quiet mode.
Use holiday mode.
Set the space operation mode.
Change settings in [7]:
> User
settings.
Turn ON or OFF the instant hot
water control.
.
.
. Example: Comfort
.
Where used
▪ Room
temperature
schedules
▪ Room temperature home
page (
and
) if user
profile = Detailed
Daikin Altherma hybrid heat pump
4P355632-1A – 2016.02
- Quick Links:
- Table of Contents
Hide quick links:
Table of Contents
