Watermark WM-BT08 Quick Start Manual

Quick Start Guide Bluetooth Music Receiver WM-BT08

Compatible with the following models:



AUDI: Chorus 2, Concert 1/2, Delta, Symphony 1/2, Navigation Plus 1/2



VW: Alpha 5, Beta 5, Gamma, Gamma CD, Premium 5/6, Premier 4, MCD Navi, MFD Navi



SKODA: MFD Navi, MS 303, MS 501, MS 502, Symphony CD & Kassette



SEAT: Alana, Aura, Aura CD, Elba, Lena, Liceo, Scala, MFD

Connect the Adapter:

1. Remove The Radio.

2. Connect the included adapter (WM-4696) to the Bluetooth adapter WM-BT07. In the

following called WM-BT08.

3. Insert the blue plug of the adapter into chamber C3 (marked blue in the picture).

4. If necessary, remove the blue connector from the yellow-green-blue connector

combination and attach the blue connector of the WM-BT08 instead.

5. With a CD changer already connected in chamber C3 (blue), it is thus removed and

can no longer be used in the system.

6. If you have installed a black 20-pin connector in the vehicle, you will also need the

adapter WM-4693 (mini-ISO adapter / extension). This can be ordered in our online

shop at www.wm-outlet-store.de.

7. Now connect the black ground cable with the eyelet either to the radio housing or

the black cable directly to a ground line to the Quadlock plug. Without a good

ground connection, the function of the adapter is not given.

8. Establish a Bluetooth connection by activating Bluetooth pairing and searching for

the `` WM` 'Bluetooth device. You should then set the volume to full volume on the

connected device.

9. Before reinstalling the radio, test the function of the adapter. Switch on the AUX

function with the CD changer button.

Has something been left unclear? You can reach us MO-FR, from 8-17 o'clock

under the E-Mail: [email protected]

REV.:002 06/2018FF