Page 1
Home Network System KX-HNB600FX Model No. Thank you for purchasing a Panasonic product. This document explains how to configure the hub and access it using a mobile device. These steps must be followed before you can use the system. For details about how to use the system, refer to the User’s Guide (page 16).
Table of Contents Introduction Accessory information ........3 Expanding the Panasonic Home Network System ............4 Important Information About this system .........6 For your safety ..........6 Important safety instructions ......7 Security cautions ..........7 For best performance ........8 Other information .........8 Setup Part names and functions ......10 LED indicator ..........10...
Introduction Accessory information Supplied accessories Accessory item/Part number Quantity AC adaptor/PNLV236CE Telephone line cord Wall mounting adaptor Additional accessories microSD card (not supplied) A commercially-available microSD card must be inserted into the hub in order to record images from cameras. The following types of microSD cards are supported. R microSD / SDHC card: Up to 32 GB Other information R Design and specifications are subject to change without notice.
Introduction Expanding the Panasonic Home Network System The Panasonic Home Network System is a wireless system that lets you create a powerful network of devices, such as cameras, sensors, and smart plugs, and control them all with an easy-to-use app.
Page 5
R Built-in overcurrent and overwattage detection for added peace of mind R Power consumption is logged for your reference R Smart plug availability varies by region. Contact your Panasonic dealer for more information. R Smart plug appearance varies by region.
R This system is an auxiliary system; it is not R Do not connect non-specified devices. designed to provide complete protection from property loss. Panasonic will not be Installation held responsible in the event that property loss occurs while this system is in operation.
Important Information and 2.472 GHz with a peak transmission 4. Use only the power cord indicated in this power of 100 mW. document. R Do not use the product in health care facilities if any regulations posted in the SAVE THESE INSTRUCTIONS area instruct you not to do so.
Hub location/avoiding noise R Operating the product near electrical The hub and other compatible Panasonic appliances may cause interference. Move devices use radio waves to communicate with away from the electrical appliances.
Page 9
Important Information R Do not use benzine, thinner, or any Penalties may be applicable for incorrect abrasive powder. disposal of this waste, in accordance with national legislation. Protecting your recordings For business users in the European R Do not remove the microSD card or Union disconnect the hub’s AC adaptor while reading or writing data to the microSD card.
Setup Part names and functions LED indicator You can use the LED indicator to confirm the hub’s status. Indicator Status No power, or LED indicator is turned Green, lit Normal operation, connected to wireless router Green, blinking Registration mode slowly Green, blinking Hub is searching for quickly...
For details about the landline phone features, refer to the User’s Guide (page 16). Note: R Use only the supplied Panasonic AC adaptor PNLV236CE. R A microSD card (not supplied) is required to record images from cameras. Refer to the...
– Make sure you know the network name (SSID) and password assigned to your wireless router Note: www.panasonic.net/pcc/support/tel/ R If the hub’s region setting is not set, the homenetwork/ hub prompts you to set it. Follow the on-screen instructions to set up the hub.
Page 13
Setup When prompted, tap [Set up the Hub]. When prompted, enter a name for the hub and your mobile device and then tap When prompted, press MWi-Fi SETUPN [OK]. on the hub. R The hub name setting is used by your R The LED indicator blinks in yellow.
Setup R If prompted to select the device to be R The app’s home screen is displayed set up, tap [Hub]. when initial setup is complete. When prompted, tap [Set up the Hub]. Information about Wi-Fi When prompted, press MWi-Fi SETUPN on the hub.
Setup – Make sure your mobile device and the hub Using registration buttons are connected to the same wireless router Hub: Using the mobile device that you want to Press and hold the registration button register, download the [Home Network] until the LED indicator blinks slowly in app and then start the app.
R Multiple walls R Android 4.1 or later versions are R When using each device on separate floors recommended. or in different buildings R You can also access the User’s Guide at the web page listed below. www.panasonic.net/pcc/support/tel/ homenetwork/manual/...
Appendix Slide the wall mounting adaptor up until it Wall mounting clicks into place. R Make sure the “UP” mark on the wall You can use the included wall mounting mounting adaptor faces upwards. adaptor to wall mount the hub if desired. R Align and insert the tabs ( ) of the Note:...
Page 18
Appendix Mount the hub on a wall then slide down Removing the wall mounting adaptor to secure in place. While pushing the release levers (A) away R Pass the AC adaptor cord and the from the centre of the wall mounting adaptor, telephone line cord through the groove slide the adaptor down (B).
R RF transmission power At least three (3) years from delivery of this DECT: product, Panasonic Corporation will give to Approx. 83 mW (average power per any third party who contacts us at the channel: when 4 cameras, a handset, and...