Table of Contents
en-us Basic Operation
13 Basic Operation
Basic Operation
Basic Operation
13.1 Protection against
unintentional
operation
Your appliance is equipped with a
function that helps to prevent un-
intentional operation, e.g. by chil-
dren. After starting the appliance,
the door has to be closed within 4
seconds, otherwise the operation
will be paused.
Note: This function cannot be de-
activated.
Requirements
¡ Pressing Start to begin a wash
cycle
¡ Setting Delay time and press-
ing Start
¡ Opening the door while Delay
time is active
¡ Opening the door during a
wash cycle.
Close the door.
1.
Press
.
2.
a The wash cycle will resume.
13.2 Switching on the
appliance
Press
▶
The program last selected and
the additional function last se-
lected will be set by default.
If you do not perform any ac-
tions on the appliance for 10
minutes, it will automatically
switch off.
13.3 Setting a cycle
To adjust the wash cycle to the
soiling level of the dishware, se-
lect a suitable cycle.
Press the right cycle button.
▶
28
.
a The cycle is set and the cycle
button flashes.
a The remaining run time of the
cycle appears on the display.
13.4 Setting options
You can set options to complete
the chosen cycle.
Note: The available options de-
pend on which cycle is selected.
Press the button for the rele-
▶
vant option.
a The option is set and the option
button flashes.
13.5 Setting the electronic
delay time
You can delay the start of the
wash cycle by up to 24 hours.
Press
.
1.
a "h:01" appears on the display.
Use
to set the required
2.
start time for the wash cycle.
Press
.
3.
a This activates the electronic de-
lay time.
Tip: To deactivate the electronic
delay time, press
until "h:00" appears on the dis-
play.
13.6 Starting the wash
cycle
Press
.
▶
a The wash cycle has ended
when the display shows
"0h:00m".
Notes
¡ If you want to add more dish-
ware while the appliance is run-
ning, do not use the collecting
tray as a handle for the upper
rack. You might touch the par-
tially dissolved tablet.
repeatedly
Table of Contents
