Table of Contents
GE Healthcare
Revision 1
Job Card PHY A044 - Remove/Reinstall Gantry Covers
1
SUPPLIES
None
2
TOOLS
Standard Tool Box
3
REQUIRED EFFORT
Personnel: 1 Field Engineer
Time: 20 minutes to remove covers, and 30 minutes to reinstall covers
4
SAFETY PRECAUTIONS
WARNING
Before beginning work, shut down the equipment and switch off the Generator hospital
supply circuit breaker. Lock it in the off position or mark it clearly with a warning sign to
prevent others from applying power.
Never lay a cover down with the painted side on a hard surface.
5
PREREQUISITES
None
6
OVERVIEW
For an overview of the covers, refer to
List of covers:
•
Column Covers (section 7)
-
Cable Exit Cover
-
Top Column Cover (Left and right)
-
Bottom Column Covers (Rear and front)
-
Front covers (Left and right)
•
Compression and Arm Covers (section 8)
-
Compression Carriage Cover
-
Compression Arm Covers (Left and right)
•
Tube Head Covers (Left and right) (section 9)
•
Detector Covers (Upper and lower covers) (section 10)
There are different types of covers
•
Pilot covers
•
Series covers which are divided into two kinds:
-
Flexible covers
-
Rigid covers
The procedure is valid for all covers except where specified.
JC-PHY-A-044.fm
Service Information and Procedures Class A 2385072-16-8EN
Job Card PHY A044 - Remove/Reinstall Gantry Covers
Gantry Covers on page 189.
Page no. 523
Senographe DS
Chapter 6
Chapter 6
- Quick Links:
- Err Sub A001 - Generator Error...
Hide quick links:
Table of Contents
Troubleshooting
