Part Names And Functions - Mitsubishi Electric PLH Series Technical & Service Manual

2

Indoor (Main) Unit

Horizontal Air Outlet

Sets airflow horizontal automatically

during cooling or dehumidifying.

Downward Air Outlet

Sets airflow downward

automatically during

heating.

Remote controller

On the controls are set, the same operation mode can be repeated by simply pressing the ON/OFF button.

Operation buttons

button

This switches between continuous

operation and the timer operation.

button

Press this button to switch the cooler

electronic dry (dehumidify) automatic

and heater modes.

TEMP button

This sets the room temparature The

temparature setting can be per-

formed in 1°C units

Setting range

Cooler 19°C to 30°C

Heater 17°C to 28°C

This model name of the remote con-

troller is indicated.

Air Intake

Inhales air from room.

button

This sets of switches the current

time. start time and stop time.

button

This switches the horizontal fan

motion ON and OFF.

(This button does not operate in this

model)

Filters

Remove dust and pollutants

from inihaled air

Auto Air Swing Vane

Disperses airflow up and

down and adjusts the angle

of airflow direction.

button

This sets the ventilation fan

speed.

FILTER

CHECK MODE

TEST RUN

CHECK-TEST RUN button

Only press this button to per-

form an inspection check or test

operation Do not use it for

nomal operation.

Grill

ON/OFF button

This switches between the operation

and stop modes each time it is

pressed. The lamp on this butoon

lights during operation.

button

This adjusts the vertical angle of the

ventilation.

FILTER button

This resets the filter service indica-

tion display.

5