Startup; Turn The Power Switch On The Rear Panel On; Enter A User Name And Password; Display Live Image - Panasonic WJ-HD316 Operating Instructions Manual
Digital disk recorders
Hide thumbs
Also See for WJ-HD316:
- Quick operation manual (7 pages) ,
- Configurations (5 pages) ,
- Specifications (3 pages)
Table of Contents
STARTUP
z Insert the power plug to an outlet
(AC 120 V, 60 Hz)
Note: Make sure the power source is AC 120 V, 60 Hz.
x Turn the power switch on the rear
panel on.
The OPERATE indicator will light and the system check
(checking the system and hard disk) will start.
The startup splash image below will be displayed on the
monitor 2 and the VGA monitor during the system check.
When the auto login is off, the login window will be dis-
played if any button on the front panel of this unit is pressed
after the system check. (Go to step 3)
When the auto login is on, live image will be displayed after
the system check.
Notes:
• If the hard disk configuration had been changed after
the last startup or the hard disk has problems, the disk
configuration menu page will be displayed automatical-
ly after the startup splash. (Refer to page XX for further
information.)
• It is possible to display the disk configuration menu by
pressing the SET button when the image below that
says the system check has been completed is dis-
played.
Important
When using the optional extension unit (WJ-HDE300), turn
the power of this unit after turning on the power of all exten-
sion units.
16
c Enter a user name and password.
Rotate the jog dial to select a character to be entered in the
cursor position.
It is also possible to enter numbers by pressing the camera
selection buttons ([1] - [10/0] for WJ-HD316, [1] - [9], [0] for
WJ-HD309).
To move the cursor, press the arrow buttons.
It is the same way to enter characters as the way to edit
characters attached to images. Refer to page XX for further
information.
v Display live image.
Press the SET button to display live image.
If the authentication window is displayed, enter user name
and password.
When authenticated, live image will be displayed.
When not authenticated, the authentication window will be
displayed again.
- Quick Links:
- Operating Instructions
Hide quick links:
Table of Contents
