Table of Contents
5.
Specify the model of the [Target inverter] from the lists in the "Convert" sub window. Click [OK] to convert the
parameters and close the "Convert" sub window.
(When several options are selectable as a target, the "Target option" window appears. Select the target option.)
6.
The converted parameter settings for the target inverter are displayed in the "Convert" window.
7.
Select [Reflect...] in the "Convert" window to display the "Reflect" window.
To save the setting to a file
Select [Save in file]. Specify the destination to save the file and click [OK]. The converted parameter setting is saved
in the parameter file (*.pr4).
To reflect the setting to the project
Select [Reflect to project]. Specify the station to reflect the setting and click [OK]. The converted parameter setting
is reflected to the project.
3.3.5
Precautions for the convert function
Check the following items to use the convert function, and adjust the settings as required.
For the parameter details, refer to the Instruction Manual of the inverter.
To convert from FR-A700 inverters to FR-A800(-E) inverters
• Set the following parameters as required in the "Parameter list" window because they are not converted.
Pr.69 Retry count display erase
Pr.170 Watt-hour meter clear
Pr.171 Operation hour meter clear
Pr.172 to Pr.174 (User group selection)
Pr.259 Main circuit capacitor life measuring
Pr.498 PLC function flash memory clear
Pr.501 (Communication option parameter)
Pr.503, Pr.686, and Pr.688 (Maintenance timer)
Pr.805 Torque command value (RAM)
Pr.898 Power saving cumulative monitor clear
C29(Pr.925) Motor temperature detection calibration (analog input)
Pr.991 PU contrast adjustment
Pr.1006 to Pr.1008 (Clock function)
Pr.1020 Trace operation selection
*1
Available when the plug-in option is connected.
Set the target inverter
Set the target option
Select [Reflect...]
Specify the destination
to save the file
*1
1
2
3
4
5
6
7
8
9
10
125
3. FUNCTION
3.3 Convert
Hide quick links:
Table of Contents
