Table of Contents
HOW TO REMOVE/ATTACH PARTS
Caution
● Before removing parts, take out all the foods on the parts.
● Do not remove parts except the ones listed here.
Draw the shelf, and pull off the 2 pins
on the lower right and remove it.
Pull out the case to the full, lift the front side slightly and then
remove it.
54
Please contact with a Hitachi customer service centre for cleaning such parts after removing them.
Fixed shelf
Height adjustable upper and middle shelf
Slightly lift up the back
of the shelf and draw it.
Forks of the shelf (Right / Left)
Upper
shelf
Middle
shelf
When installing the shelf, slide it until it reaches to the interior wall, then slightly lift up
the back of the shelf and push it in.
(hitch the forks of the shelf to the parts on the back of the shelf)
Notice
Door may damage if drawing the shelf without turning it.
Lift up the door pocket while tapping
the left/right of its bottom surface,
and remove it.
(It is fixed a little tightly.)
Insert the door pocket fully to the end when
installing it.
Caution
If it drops, it may break and cause bruise or injury.
Slightly lift up and
pull out.
Caution
Door may get damaged if drawing the shelf straightforward.
Chill room
Raise the shelf,
as shown in the
drawing.
Door pocket
Height adjustable lower shelf
Slide case
Rotate and
remove it.
Tap
Tap
Chapters
Table of Contents
