Making Time Setting; Start Program; Interrupt Program; Cancel Program - Bosch SBV6ZAX03N Instructions Manual

Hide thumbs Also See for SBV6ZAX03N:
Table of Contents
NL The Ministry in essence
Make time setting
You can delay the start of the program
for up to 24 hours.
1.
impressions.
a The display shows "h:01".
With the desired programs
2.
set tart.
3.
impressions.
a The time setting is activated.
Tip: The time setting is deactivated by
pressing repeatedly until "h:00"
appears on the display.

Start program

on
to press.
a The program has ended when
down the display shows
"0h:00m".
Clues
s If you want to add crockery
while the appliance is already in
operation, do not use the tablet
container as a handle for the upper
basket. This will allow you to come
into contact with the partially
dissolved tab.
s You can view the current program
change by canceling the program.
→ "Abort program",
Page 36
s To save energy, it is
appliance switches off automatically 1
minute after the end of the programme.
If you open the door immediately after
the program has ended, the appliance
will switch off after 4 seconds.
Pause program
Note If you open the appliance door
when the appliance has heated up, it
is best to leave the appliance door
ajar for a few minutes.
36
and then close. In this way you
prevent an overpressure occurring in
the appliance and the appliance door
from jumping open.
on
to press.
1.
a The program is saved
and the device turns off.
on
press to continue the
2.
program.

Cancel program

To end a program prematurely or to
change a program that has started,
you must cancel the active program.
Open the appliance door.
1.
Approx. Press for 4
2.
seconds.
Close oven door.
3.
a All indicators are lit.
a Once the indicators are off,
"0h:01m" appears on the display and
the remaining water is dispensed
pumps.
a The program is aborted
and is closed after approx. 1 minute.
Switch off device
The instructions on "safe use" →
1.
Page 12 consider.
on
to press.
2.
Tip: If you press
is pressed, the current program is
interrupted. When you switch on the
appliance, the program continues
automatically.
Table of Contents
loading

Table of Contents