Table of Contents
NL The Ministry in essence
the most efficient program in
terms of energy and water
consumption for this type of
crockery and complies with the EU
Ecodesign Regulation.
If you do not operate the device for
10 minutes, the device will turn off
automatically.
Set program
You can adjust the wash cycle to the
degree of soiling of the crockery by
selecting a suitable programme.
Press the program button.
▶
→ "Programs", Page 17
a The program is set and the
program button flashes. a The
remaining program run time
appears on the display.
Set additional function
You can set additional functions in
addition to the selected washing
programme.
Remark: The available additional
functions depend on the selected
program.
→ "Programs", Page 17
Press the button for the desired
▶
additional function.
→
"Additional functions", Page 19
a The additional function is set and the
button of the additional function flashes.
Make time setting
You can delay the start of the program
for up to 24 hours.
1.
impressions.
a The display shows "h:01".
Set the desired program start with .
2.
3.
impressions.
a The time setting is activated.
32
Tip: The time setting is deactivated by
pressing repeatedly until "h:00"
appears on the display.
Start program
Press
▶
a The program has ended when
down the display shows
"0h:00m".
Comments
sex If you want to add crockery
while the appliance is already
running, do not use the tablet tray
as a handle for the upper basket.
This will allow you to come into
contact with the partially dissolved
tab.
sex You can view the current program
borrow change by aborting the
program.
→ "Cancel program", page
33
sex To save energy, it is
appliance switches off automatically 1
minute after the end of the programme.
If you open the door immediately after
the program has ended, the appliance
will switch off after 4 seconds.
Activate key lock
The key lock prevents the device from
being operated accidentally or
improperly while it is in operation.
▶ Approx. 3 seconds on
a The key lock is activated
and is automatically deactivated
at the end of the program.
springed.
a When the device is operated,
flashes on the display. a In the
event of a power failure, the key-
blocking activated.
.
to press.
Table of Contents
