Page 3
Button, to unlock the remova- ble control panel (release panel) BAND button (Band), to switch to radio mode, to select the FM memory levels and the MW and LW frequency ranges (MW and LW are not available on the Freiburg C31 and Las Vegas DJ31) TS, to start the Travelstore func- tion...
IDC A 09. You can also connect the CDC A 05 and CDC A 071 CD changers by using an adapter cable (Blaupunkt no.: 7 607 889 093). The CDC A 08 CD changer is supplied with the Las Vegas DJ31 and the San Diego DJ31.
As a way of protecting your car radio against theft, the unit is equipped with a removable control panel (release pan- el). Without this control panel, the car radio is worthless to a thief. Protect you car radio against theft by taking the control panel with you every time you leave your vehicle.
There are various ways of switching the unit on/off: If the unit is correctly connected to the vehicle's ignition and it was not switched off using button @, it will switch on/off simultaneously with the ignition. You can also switch the unit on even if the ignition is off: To do so, press button @.
The system volume can be adjusted in steps from 0 (off) to 66 (maximum). To increase the system volume, button ?. press the To decrease the system volume, button ?. press the You can set the unit's default power-on volume. Press the MENU button <.
Page 9
You can find out from your Blaupunkt dealer which navigation systems can be used with your car radio. If a traffic information message is re- ceived during a telephone call or whilst a navigation announcement is being made, the traffic message will only be played after the call or voice output is finished.
This unit is equipped with an RDS radio receiver. Many of the receivable FM sta- tions transmit a signal that not only car- ries the programme but also additional information such as the station name and programme type (PTY). The station name appears in the dis- play as soon as it is received.
Five stations can be stored on each memory level. Briefly press the BAND (TS) button 2 or the FMT button 2 to switch between the memory levels and frequency ranges. There are various ways of tuning into a station. button ;. Press the The unit tunes into the next receivable station.
Press one of the station buttons 1 - 5 = for longer than two seconds to store the station to that button. You can automatically store the five stations with the strongest reception in the region (only for FM). The sta- tions are stored in the FMT memory.
Page 13
For example, the programme types can CULTURE TRAVEL SPORT NEWS ROCK CLASSICS Using the PTY function, you can direct- ly select stations of a particular pro- gramme type. If you specify the programme type and start seek tuning, the radio will switch from the current station to a station of the selected programme type.
You can set the language in which the programme type is displayed. Press the MENU button <. Keep pressing the ; until “PTY LANG” appears in the display. button ; to Press the switch between German, English and French. When the required language appears in the display, press the MENU button <...
Page 15
Your radio unit is equipped with an RDS- EON receiver. EON stands for En- hanced Other Network. Every time a traffic announcement (TA) is transmitted, you will automatically be switched from a station that does not provide traffic information to a station within the broadcasting network that does.
If there is no cassette inserted in the unit yet, insert a cassette with its open edge on the right into the cassette com- partment. The side of the cassette that is upper- most is then played first of all. If a cassette is already inserted in the unit, keep pressing the CD•C button 9...
Press button 3 (RPT) =. The current track is repeated. RPT ap- pears in the display. When the end of the track is reached and the tape is re- winding, “RPT TRCK” appears in the display. To stop repeating the track, press button 3 (RPT) = again.
Press the MENU button <. Keep pressing the ; until “BLK SKIP” appears in the display. button ; to Press the switch blankskip on/off. When you have finished making your changes, press the MENU button <. If you play a “metal” or “CrO you should set the tape type to “MTL ON”.
To fast search backwards or forwards, keep one of the pressed until fast reversing / for- warding begins. If you wish to repeat the current track, briefly press button 3 (RPT) =. “RPT TRCK” appears briefly and RPT lights up in the display. If you wish to repeat the current CD, press button 3 (RPT) = again.
Press button 2 ( ) =. “PAUSE” appears in the display. Press button 2 ( ) = while in pause mode. Playback is continued. To switch between the track number / CD number display and the track number / playing time display, press the MENU button <.
Page 21
Press the MENU button <. Keep pressing the ; until “24 H MODE” or “12 H MODE” appears in the display. button ; to Press the switch between the modes. When you have finished making your changes, press the MENU button < twice. To display the time when the unit is off and the vehicle ignition is on, press the MENU button <.
You can adjust the sound and volume distribution settings separately for each source (radio, cassette, CD changer and AUX). To adjust the bass, press the AUDIO button :. “BASS” appears in the display. button ; to ad- Press the just the bass. When you have finished making your changes, press the AUDIO button :.
If you want to connect an external au- dio source, you will need an adapter cable. You can obtain this adapter cable from your authorised Blaupunkt dealer. Press the MENU button <. “MENU” appears in the display. Keep pressing the ;...
If you wish to enforce a claim under the manufacturer’s guarantee that is provid- ed by Blaupunkt, please send the faulty unit together with the purchase receipt to the Blaupunkt customer service cen- tre in your country. You can find out...