For programmes at low temperatures:
Press the A button.
1.
Select Spin or Drain .
2.
Press the A button.
3.
Programme end during rinse
hold
In the display panel, $ flashes, and the
preset spin speed and remaining
programme length are displayed for the
selected programme.
Continue the programme by:
Pressing the A button or
■
Changing the spin speed, or setting
■
the programme selector to Drain
and then pressing the A button.
Programme end
- 0 - and ¼ appear in the display panel.
The A button indicator lamp is off.
Removing laundry/switching
off the appliance
Open the door and remove the
1.
laundry.
Press the # button. The appliance is
2.
switched off.
Turn off the tap.
3.
Not required for Aqua-Stop
Note:
models.
Notes
Do not leave any items of laundry in
■
the drum. They may shrink in the
next wash or discolour another item.
Remove any foreign objects from the
■
drum and the rubber seal – risk of
rusting.
Wipe the rubber seal dry.
■
Appliance settings
Leave the door and detergent
■
drawer open so that any residual
water can evaporate. ~ Page 25
Always wait until the programme
■
ends, as the appliance could still be
locked. Then switch the appliance
on and wait for it to unlock.
If the display panel goes off at the
■
end of a programme, the energy-
saving mode is active. Press any
button to activate the panel.
Q
Appliance settings
You can change the following settings:
A p p l i a n c e s e t t i n g s
The volume of the buttons and
■
information signals (e.g. at the end
of the programme)
Select/deselect the appliance's
■
automatic switch-off function.
~ Page 7
You will need to activate the setting
mode in order to change these settings.
en
23