Bosch WAW24420GR Instruction Manual And Installation Instructions

Table of Contents
Washing machine
WAW24420GR
en Instruction Manual and Installation Instructions
Table of Contents
loading

Summary of Contents for Bosch WAW24420GR

  • Page 1 Washing machine WAW24420GR en Instruction Manual and Installation Instructions...
  • Page 2: Your New Washing Machine

    Your new washing machine Display rules : Warning! You have chosen a Bosch washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
  • Page 3: Table Of Contents

    Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use.
  • Page 4: Intended Use

    Intended use Cleaning and maintenance . . . 24 Intended use Machine housing/control panel ..25 Drum ......25 For private domestic use only.
  • Page 5: Safety Instructions

    Safety instructions Reaching into the drum Safety instructions ■ when it is turning can cause injuries to hands. Electrical safety Do not reach into the drum S a f e t y i n s t r u c t i o n s when it is turning.
  • Page 6: Safety For Children

    Safety instructions Safety for children Warning Risk of poisoning! Warning Detergents and care products Danger of death! may be poisonous if If children play with the washing consumed. machine, they may get into life- Keep detergents and care threatening situations or injure products out of the reach of themselves.
  • Page 7: Environmental Protection

    Environmental protection Energy-saving mode: The display ■ Environmental panel lighting goes out after a few minutes and the A button flashes. protection Press any button to activate the lighting. Packaging/used appliance Energy-saving mode is not activated E n v i r o n m e n t a l p r o t e c t i o n if a programme is running.
  • Page 8: Main Points In Brief

    Main points in brief Main points in brief M a i n p o i n t s i n b r i e f Connect the mains Open the door. To switch on, press Select a plug. Turn on the the # button.
  • Page 9: Getting To Know The Appliance

    Getting to know the appliance Getting to know the appliance Washing machine G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer ~ Page 20 Operating/display panel Door with door handle 9S Open the door...
  • Page 10: Control Panel

    Getting to know the appliance Control panel All the buttons are sensitive Note: H Changing the default programme (except for the main switch) and only settings: ~ Page 18 need to be pressed lightly. Temperature (Θερμοκρ.), ■ Spin speed (Στύψιμο), ■...
  • Page 11: Display Panel

    Getting to know the appliance Display panel Further information Programme progress: Prewash Washing Rinse à Spin - 0 - Programme end Programme end during Rinse Stop - P - Pause, e.g. to reload laundry Default programme settings: ( Temperature in °C Washing machine door: Ž...
  • Page 12: Laundry

    Laundry Some examples of soiling levels can Laundry be found on ~ Page 13 – Light: Do not prewash, select the P repare the laundry SpeedPerfect setting if L a u n d r y necessary Caution! – Normal Damage to the appliance/fabrics –...
  • Page 13: Detergent

    Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial for selecting the correct detergent, temperature and Saving Soiling/note...
  • Page 14: Overview Of Programmes

    Overview of programmes Overview of programmes Programmes on the programme selector O v e r v i e w o f p r o g r a m m e s Programme/type of laundry/information Settings Programme name Max. load Brief explanation of the programme and for which fabrics it is Temperature that can be selected suitable.
  • Page 15 Overview of programmes Programme/type of laundry/information Settings Delicate / Silk (Μεταξωτά) Max. 2 kg For delicate, washable fabrics, e.g. made of silk, satin, synthetic Ž - 40 °C fibres or blends (e.g. silk blouses, silk scarves) $ - 800 rpm Use a detergent suitable for machine-washing delicates or Note: .
  • Page 16 Overview of programmes Programme/type of laundry/information Settings *** Allergy plus(Αντιαλλεργικό) Max. 7 kg/5* kg Hard-wearing fabrics made of cotton or linen Ž - 60 °C Note: . Particularly suited to washing items that need to be $ - 1600** rpm hygienically clean and especially kind to sensitive skin thanks to EcoPerfect, SpeedPerfect, the longer wash cycle at a defined temperature, higher water level...
  • Page 17: Starching

    Overview of programmes Programme/type of laundry/information Settings *** Duvet (Παπλώματα) Max. 2.5 kg Machine-washable items stuffed with synthetic fibres, such as Ž - 60 °C pillows, quilts and bedspreads; also suitable for items stuffed with $ - 1200 rpm down EcoPerfect, SpeedPerfect, Note: .
  • Page 18: Programme Default Settings

    Programme default settings Finish in Programme default (Λήξη σε) settings Before starting the programme, you can preselect the programme end The default programme settings are P r o g r a m m e d e f a u l t s e t t i n g s displayed in the display panel after ("Ready in"...
  • Page 19: Additional Programme Settings

    Additional programme settings After starting the programme, you can Operating the add or remove laundry if necessary. ~ Page 22 appliance Preparing the washing O p e r a t i n g t h e a p p l i a n c e machine Additional programme settings...
  • Page 20: Placing Laundry Into The Drum

    Operating the appliance The maximum load and the duration Measure and add detergent ■ of the programme (alternately) and care products In appliances with a drum light: Caution! The drum is lit after switching on the Damage to the appliance appliance, after opening and closing the Cleaning agents and agents for pre- door and after starting the programme.
  • Page 21: Change The Programme Default Settings

    Operating the appliance Pour the detergent and care products For models without a measuring aid, into the appropriate compartments: pour the liquid detergent into the appropriate dispenser and place it in the drum. Change the programme default settings You can use or change the default settings for this washing cycle.
  • Page 22: Start The Programme

    Operating the appliance Start the programme The childproof lock remains Note: active, even once the washing machine Press the A button. The indicator lamp has been switched off. Before selecting lights up and the programme starts. the next programme, deactivate the childproof lock.
  • Page 23: Cancel The Programme

    Appliance settings Cancel the programme Wipe the rubber seal dry. ■ For programmes at high temperatures: Press the A button. To cool down laundry: Select Rinse . Press the A button. For programmes at low temperatures: Press the A button. Leave the door and detergent Select Spin or Empty .
  • Page 24: Changing The Signal Volume

    Sensors Press the Temperature button and, Sensors at the same time, turn the programme selector clockwise to A utomatic load sensing position 2. Release the button. S e n s o r s The setting mode is activated and the Depending on the type of fabric and preset volume for the information load, the automatic load sensing...
  • Page 25: Machine Housing/Control Panel

    Cleaning and maintenance Descaling Warning Risk of poisoning! Descaling should not be necessary if Toxic vapours can be produced by the detergent is measured out correctly. cleaning agents that contain solvents, However, if it is required, follow the e.g. cleaning solvent. manufacturer's instructions for the Do not use cleaning agents that contain descaling agent.
  • Page 26: The Drain Hose At The Siphon Is Blocked

    Cleaning and maintenance Allow the water to cool down. Turn off the tap so that no more water can flow in and has to be drained via the drain pump. Switch off the appliance. Pull out the mains plug. Open and remove the service flap. To prevent unused detergent Note: from flowing straight into the drain...
  • Page 27: Faults And What To Do About Them

    Faults and what to do about them. Pull out the mains plug. Warning Risk of scalding! Then clean the filter: When you are washing at high Disconnect the hose from the tap. temperatures, there is a risk of scalding Clean the filter with a small brush. if you come into contact with hot water and laundry.
  • Page 28: Information On The Display Panel

    Faults and what to do about them. Information on the display panel Display Cause/Remedy - P - and ¼ The door is unlocked. It is possible to add laundry. - P - The temperature is too high. Wait until the temperature drops. ■...
  • Page 29 Faults and what to do about them. Faults Cause/Remedy The drum briefly jerks or Not a fault – the internal motor test may cause the drum to jerk or judder briefly judders after the when the wash programme starts. programme has started. The water is not draining.
  • Page 30: After-Sales Service

    After-sales service Faults Cause/Remedy The display panel/ Has there been a power failure? ■ indicator lamps do not Have the fuses blown? Reset/replace the fuses. ■ work while the appliance If the fault occurs repeatedly, call customer services. ■ is running. There is detergent Some phosphate-free detergents contain water-insoluble residue.
  • Page 31: Consumption Rates

    Consumption rates Consumption rates Energy and water consumption, programme duration and C o n s u m p t i o n r a t e s residual moisture for the main washing programmes (approximate values) Programme Load Energy Water Programme consumption* consumption*...
  • Page 32: Efficiency Test Programmes For Cotton Fabrics

    Technical data Efficiency test programmes for cotton fabrics The following programmes (standard programmes, indicated by ü) are suitable for cleaning normally soiled cotton fabrics and are the most efficient with respect to combined energy and water consumption. Standard programmes for Cottons in accordance with the (EU) directive no. 1015/2010 Programme + temperature + button Load Approximate programme...
  • Page 33: Safety Instructions

    Positioning and connecting Useful tools Spirit level for aligning ■ Spanner with: ■ – WAF13 for loosening the transport braces, and – WAF17 for aligning the appliance feet Safety instructions Warning Risk of injury! The washing machine is very heavy. ■...
  • Page 34: Installation Surface

    Positioning and connecting Installation surface Notes Recess width of 60 cm required. ■ The washing machine be stable Only install the washing machine Note: ■ so that it does not move around. underneath a continuous worktop The installation surface must be firm that is securely connected to ■...
  • Page 35: Hose And Cable Lengths

    Positioning and connecting Unscrew and remove all four Right-hand connection ■ transport brace screws. Remove the sleeves. To do this, remove the mains cable from the holders. Insert the covers. Lock the covers firmly in place by applying pressure The following are available from Tip: to the snap-in hooks.
  • Page 36: Water Outlet

    Positioning and connecting Do not alter (shorten, cut through) Model: Aqua-Secure ■ ■ the water supply hose (otherwise its strength is no longer guaranteed). Only tighten the screw connections ■ by hand. If the screw connections are tightened too much with a tool (pliers), the thread may become damaged.
  • Page 37: Levelling

    Positioning and connecting Caution! Drainage into a plastic pipe with ■ rubber bushing or into a drainage Damage to the appliance/fabrics If the end of the drain hose is immersed in the drained water, water may be sucked back into the appliance and may damage the appliance/fabrics.
  • Page 38: Electrical Connection

    Positioning and connecting Electrical connection The mains cable does not come into ■ contact with heat sources. Warning Before washing for the first Danger of death! There is a risk of electric shock if you time touch live components. Never touch or hold the mains plug The washing machine was thoroughly ■...
  • Page 39: Transportation

    Positioning and connecting Transportation Before switching on the appliance again: E.g. when moving house Notes Preparatory work: The transport braces must be ■ Turn off the tap. removed. Reduce the water pressure in the Pour approx. 1 litre of water into ■...
  • Page 40 0344 892 8979 (Calls charged at local or mobile rate.) 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. Robert Bosch, Hausgeräte GmbH Carl-Wery-Straße 34 81739 München DEUTSCHLAND...

Table of Contents