Quick Links
s
Use
CE1N2206en
2018-11-07
REV24RF..
Radio set with 7-day
room temperature
controller
Comprising a room temperature controller (with integrated radio transmitter)
and receiver with relay outputs
·
Mains-independent, battery-operated room temperature controller featuring
user-friendly operation, easy-to-read display and large numbers.
·
Self-learning two-position controller with PID response (patented).
·
Operating mode selection:
- 7-day automatic mode with max. 3 heating or cooling phases.
- Continuous comfort mode.
- Continuous energy saving mode.
- Protection against frost or overheating.
- Exception day (24 hour operation) with max. 3 heating or cooling phases.
·
A separate temperature setpoint can be entered in automatic mode and for
the exception day for each heating or cooling phase.
·
Heating zone control.
·
Possibility to control cooling equipment.
·
Advantage for retrofitting, renovating, and reconstruction purposes
(completely wireless room unit).
Room temperature control in:
· Single-family and vacation homes.
· Apartments and offices.
· Individual rooms and professional office facilities.
· Commercially used spaces.
Control for the following equipment:
· Magnetic valves of an instantaneous water heater.
2
RCR10/868
REV24RF../SET
Building Technologies
206
Related Manuals for Siemens 24RFDC/SET
Summary of Contents for Siemens 24RFDC/SET
- Page 1 REV24RF.. RCR10/868 Radio set with 7-day room temperature controller REV24RF../SET Comprising a room temperature controller (with integrated radio transmitter) and receiver with relay outputs · Mains-independent, battery-operated room temperature controller featuring user-friendly operation, easy-to-read display and large numbers. · Self-learning two-position controller with PID response (patented). ·...
- Page 2 The base helps attach the room controller to the wall. The supplied table stand allows table stand you to stand the controller anywhere in the room. You can manually attach the table stand without tools. 2 / 18 Siemens Room temperature controller radio set REV24RF../SET CE1N2206en Building Technologies 2018-11-07...
- Page 3 Energy saving mode setpoint Party mode active Time signal from Frankfurt °C / °F Temperature unit °C or °F Date (day - month - year) Heating/cooling/pump on 3 / 18 Siemens Room temperature controller radio set REV24RF../SET CE1N2206en Building Technologies 2018-11-07...
- Page 4 In party mode, symbol is displayed along with the end of party mode. Minus button Decrease values, set time, or make a selection. 4 / 18 Siemens Room temperature controller radio set REV24RF../SET CE1N2206en Building Technologies 2018-11-07...
- Page 5 Example with 3 heating phases Continuous operating The controller also offers the three 3 continuous modes comfort mode, modes energy saving mode and frost protection mode. 5 / 18 Siemens Room temperature controller radio set REV24RF../SET CE1N2206en Building Technologies 2018-11-07...
- Page 6 Return the slider to position RUN. Symbol is displayed to the left of the symbol. Press or move the slider to end holiday mode prematurely. 6 / 18 Siemens Room temperature controller radio set REV24RF../SET CE1N2206en Building Technologies 2018-11-07...
- Page 7 DIP switches 4 OFF and 5 ON: PID 12 Normal controlled system for applications in locations with normal temperature deviations. DIP switches 4 OFF and 5 OFF: 2-point 7 / 18 Siemens Room temperature controller radio set REV24RF../SET CE1N2206en Building Technologies 2018-11-07...
- Page 8 DIP switch ON: Clock run by controller-internal quartz. DIP switch OFF: Time signal DCF77 from Frankfurt, Germany. Press the DIP switch reset button to save the settings. 8 / 18 Siemens Room temperature controller radio set REV24RF../SET CE1N2206en Building Technologies 2018-11-07...
- Page 9 RUN position during these 10 minutes. Siemens recommends to set the desired settings upon startup, install the REV..DC in the desired location, and not carry out any actions on the REV..DC for the next 10 minutes.
- Page 10 . This deletes the data saved from the room controller. front of the RCR10/868 for 4 Data from the room LED_1 flashes red. This indicates that no room controller is connected to the receiver. controller 10 / 18 Siemens Room temperature controller radio set REV24RF../SET CE1N2206en Building Technologies 2018-11-07...
- Page 11 · Make sure the location is dry and protected against splash water. · You can mount the unit on most commercially available recessed conduit boxes or directly on the wall. 11 / 18 Siemens Room temperature controller radio set REV24RF../SET CE1N2206en Building Technologies...
- Page 12 REV24RF.. and RCR10/868. Repeat the test until quality is sufficient. Insufficient Sufficient Good Very good 12 / 18 Siemens Room temperature controller radio set REV24RF../SET CE1N2206en Building Technologies 2018-11-07...
- Page 13 In the case of power interruption at the RCR10/868, the relay goes to OFF. This is a software class A controller designed for use at a normal degree of pollution. 13 / 18 Siemens Room temperature controller radio set REV24RF../SET CE1N2206en...
- Page 14 Do not mixed new batteries with used batteries. · Store, transport, and dispose of the batteries in accordance with local regulations, guidelines, and laws. Also observe information from the battery manufacturer. 14 / 18 Siemens Room temperature controller radio set REV24RF../SET CE1N2206en Building Technologies 2018-11-07...
- Page 15 Housing RAL9003 signal white Color Base RAL7038 gray Size Housing with base 94 x 134.5 x 30 mm *) The documents can be downloaded from http://siemens.com/bt/download. 15 / 18 Siemens Room temperature controller radio set REV24RF../SET CE1N2206en Building Technologies 2018-11-07...
- Page 16 Housing bottom RAL 7038 gray Size Housing with base 88 x 114 x 31.5 mm *) The documents can be downloaded from http://siemens.com/bt/download. Connection diagram for receiver RCR10/868: max.16 A max.16 A Phase, AC 230 V Neutral conductor AC 230 V Phase, AC 24...250 V...
- Page 17 Room temperature controller (transmitter) REV24RF.. Receiver RCR10/868 Room temperature controller (transmitter) REV24RF.. Receiver RCR10/868 3-port valve with manual adjustment Magnetic valve Three-port valve with actuator Two-port valve with actuator 17 / 18 Siemens Room temperature controller radio set REV24RF../SET CE1N2206en Building Technologies 2018-11-07...
- Page 18 Dimensions Room temperature controller (transmitter) REV24RF.. Receiver RCR10/868 Issued by © Siemens Switzerland Ltd, 2008 - 2018 Siemens Switzerland Ltd. Technical specifications and availability subject to change without notice. Building Technologies Division International Headquarters Theilerstrasse 1a CH-6300 Zug Tel. +41 58 724 2424 www.siemens.com/buildingtechnologies...