Table of Contents
34/52
APAS sensor head | Transport and storage
Bosch Rexroth AG, Edition 11.2020, 3 842 565 042
Safety function SF2: Operator approaching the end effector
Safety function
Operator approaching the end effector
If the admissible spring force at the CDE is exceeded, safety stop 1
(without automatic restart) is triggered.
The cause of the error must be determined and remedied before a restart
can be performed.
Maximum demand rate ≤ 3,840 cycles per year or MTTFd ≥ 260.4 a.
More cases must be considered by the integrator in the risk
assessment.
5 Transport and storage
f Observe the transport instructions on the packaging.
f Please also refer to the section "Environmental conditions".
f The gold spring contacts of the plug connector X870 must be
protected during transport.
5.1
Product storage and preparation
f Set the product down on a flat surface.
f Protect the product from mechanical stress and environmental
influences such as dirt and humidity.
Achieved
PFHD [1/h]
performance level
PL d
1,5E-7
Table of Contents
