Quick Links
MultiScanner
Stud & Metal Locator with AC Tracing
The Zircon MultiScanner
AC wiring behind walls, floors, and ceilings, as well as rebar in concrete. MultiScanner
SpotLite
®
Pointing System, which automatically displays a beam of light over the edge of a stud or near metal/AC.
SpotLite
(MultiScanner Pro SL only)
Mode Selector Switch
LIMITED 1 YEAR WARRANTY
Zircon Corporation, ("Zircon") warrants this product to be free from
defects in materials and workmanship for one year from the date of
purchase. Any in-warranty defective product returned to Zircon*, freight
prepaid with proof of purchase date and $5.00 to cover postage and
handling, will be repaired or replaced at Zircon's option. This warranty is
limited to the electronic circuitry and original case of the product and
specifically excludes damage caused by abuse, unreasonable use or
neglect. This warranty is in lieu of all other warranties, express or implied,
and no other representations or claims of any nature shall bind or
obligate Zircon. Any implied warranties applicable to this product are
limited to the one year period following its purchase. IN NO EVENT WILL
ZIRCON BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM POSSESSION, USE OR MALFUNCTION OF
THIS PRODUCT.
In accordance with government regulations, you are advised that: (i) some
states do not allow limitations on how long an implied warranty lasts
and/or the exclusion or limitation of incidental or consequential damages,
so the above limitations and/or exclusions may not apply to you, and
®
®
scanner uses four different scanning modes to detect studs, metal, and hot unshielded
®
Pointing System
AC Indicator
LCD Display
On/Off Button
/MultiScanner
further (ii) this warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
Return product freight prepaid with proof of purchase date (dated sales
receipt) and $5.00 to cover postage and handling, to:
Be sure to include your name and return address. Out of warranty service
and repair, where proof of purchase is not provided, shall be returned with
repairs charged C.O.D. Allow 4 to 6 weeks for delivery.
Customer Service, 1-800-245-9265 or 1-408-866-8600
U.S. Patent #4464622, 5352974, 5619128, 6023159, 6259241, D427166
Canada Patent #1106932 • G.B. Patent #2117909B, 2159630B
©2002 Zircon Corporation • P/N 58933 • Rev B (11/02)
®
Pro SL
®
Pro SL also features the
Stud Edge Indicator
Metal Sensor
TruCal
®
Calibration Indicator
Low Battery Indicator
Battery (back of unit)
Zircon Corporation
*Attn: Returns Department
2390 Boswell Road, Suite 300
Chula Vista, CA 91914-3510 USA
E-mail: [email protected]
Related Manuals for Zircon MultiScanner
Summary of Contents for Zircon MultiScanner
- Page 1 Stud & Metal Locator with AC Tracing The Zircon MultiScanner ® scanner uses four different scanning modes to detect studs, metal, and hot unshielded AC wiring behind walls, floors, and ceilings, as well as rebar in concrete. MultiScanner ® Pro SL also features the SpotLite ®...
- Page 2 On: Press and hold the On/Off button on left side. Off: Release On/Off button. Without releasing On/Off Note: The MultiScanner will automatically turn off after button, slide unt in reverse 15 minutes of continuous use (in case button is direciton to locate the other accidentally held down in a toolbox).
- Page 3 FCC Part 15 Class B Registration Warning The MultiScanner detects from 90 to 250 V at 50 to 60 Hz This equipment has been tested and found to comply with the AC in a HOT electrical wire. The voltage detection feature limits for a Class B digital device, pursuant to Part 15 of FCC Rules.
- Page 4 • You may be holding the unit like a TV • Hold the MultiScanner so that the two Velcro™ strips on the remote, aiming it at the wall. back make contact with the wall.