Table of Contents
WEB-HMI4/C, WEB-HMI7/C, WEB-HMI7/CF, WEB-HMI10/CF, WEB-HMI16/CF AND WEB-HMI21/CF - USER'S MANUAL (SW)
The factory reset sets back the device properties and settings to factory default.
What you need:
1.
A USB Flash Drive
2.
The chromium runtime for the device un6x-chromium-xx-x.x.zip
Format the device with a FAT32 filesystem and copy the complete file
"un6x-chromium-xx-x.x.zip" onto the USB Flash Drive.
Plugin the recovery USB device to the Panel you want to reset. To start the factory
reset, use the Tap-tap function consists of a sequence. Simply tap the touchscreen
directly after powering on the device.
When the "tap-tap detected" message appears on the top of the screen, wait for 5
seconds (without touching the screen) to before entering the System Settings sub
menu.
Don't touch the screen unless you want to jump into the Default Mode of the device.
15
FACTORY RESET
Create the recovery USB device
Restore the device from USB
EN2Z-1077GE51 R0621
Table of Contents
