Table of Contents
Installing the Tympanic Thermometer
1
Insert the communication cable into the connector (1) until it clicks into place. Then route the
communication cable through one of the channels (2) in the base station.
Attach the mounting plate or mounting clamp to the base station. See "Mounting the Tympanic
2
Thermometer" on page 33 for details.
Insert the thermometer cable into the base station by aligning the white arrows on the cable
3
connector and the base station.
4
Route the cable through the strain relief (1) in the base station.
3 Installation Instructions
31
- Quick Links:
- Passwords
Hide quick links:
Table of Contents
Troubleshooting
