5 Troubleshooting Guide 5.1. SYMPTOM : Switch turned on, but motor failure to start. Check part Check point Remedy Power plug It's checked whether a power plug is put in an outlet. A power plug is put in an outlet. Power cord Breaking of power cord is checked.
6 Disassembly and Assembly Instructions For assembly, refer to the Assembly Instructions, and perform the procedures in the opposite order of disassembly. 6.1. Attachment 6.3. Lid of cord storage 1. Remove the Fixing lever for removal of the Grinder head 1.
Page 17
6.5. Bottom plate 6.8. P.C.B. (power) 1. Remove the torx screws (T20 / 8 pcs.) from the Bottom 1. Disconnect the connector from the P.C.B. (power). plate for removal there of 2. Disconnect the fasuton terminals from the P.C.B. (power). 3.
Page 18
Switch cam Breaker • Remove the Switch cam Spring for switch cam and Spring • A clow is opened and the Breaker is removed. for breaker. • Disconnect the fasuton terminals from the Breaker. P.C.B. (LED) Reshuffling switch (Microswitch) • A clow is opened and the P.C.B. (LED) is removed. •...
Page 19
4. The fixed screws (3 pcs.) are removed, switch unit, tem- 6. The Protection tube is shifted and a connector of the porary removal trout. Motor comp. is removed. 5. The Wire band B on which a condenser is being fixed is 7.
9 Exploded View and Replacement Parts List 9.1. Parts Exploded View : MK-ZJ3500 / ZJ2700 (Body)
Page 27
9.2. Replacement Parts List : MK-ZJ3500 / ZJ2700 Notes:Important safety notice • Components identified by mark have special characteristics important for safety. • " When replacing any of these components use only manufacturer's specified parts." Pcs/Set Ref. Safety Part No. Part Name &...
Page 28
Pcs/Set Ref. Safety Part No. Part Name & Description Remarks ZJ2700KTZ ZJ2700KTN ZJ3500KTZ ZJ3500KTN AMY10Q148 Rating plate AMD25J148-W0 Cleaning tool AME07J148-W0 Sausage attachment AMM96C-300 Kubbe attachment B AMM24C-300W Kubbe attachment A < SMALL STANDARDIZED METAL PARTS > XTN4+25BFJ Screw XTN4+25BFJ Screw XTN4+10GFJ Screw...