Table of Contents
4
|
Operation
4.4.5 Room thermostat control - Using the room temperature home pages
Typical room temperature home pages
To read out the actual and desired room temperature
To temporarily overrule the room temperature schedule
User reference guide
18
Leaving water temperature of the main zone
To control the leaving water temperature of the main zone, you can do the
following:
You can...
Read out the desired leaving water temperature.
Adjust the leaving water temperature.
Condition: Leaving water set point is NOT linked with
the room temperature set point.
Only change this if the desired room temperature
cannot be reached.
Define preset values.
Condition: Leaving water set point is linked with the
room temperature set point.
Only change this if the desired room temperature
cannot be reached.
See also:
▪
"Room thermostat control - Using the leaving water temperature home
4
pages" [
21]
▪
"4.7 Preset values and
Depending on the user profile, the user interface gives you either a basic or a
detailed home page. To set the user profile, refer to
4
home
pages" [
35].
User profile = Basic
20.0°C
Actual temperature
1 Go to the room temperature home page (Room).
Result: You can read out the actual temperature.
2 Press
.
Result: You can read out the desired temperature.
1 Go to the room temperature home page (Room).
2 In the detailed home page (user profile = Detailed), select the scheduled
room temperature mode (
Result: The room temperature follows the scheduled value.
4
schedules" [
37]
15:20
Mon
20.0°C
Room
Actual temperature
Scheduled
Tue
) by pressing
Location
Leaving water
temperature home page
(main)
Menu structure
"Configuring user profile and
User profile = Detailed
Mon
15:20
Room
17:30
20.0°C
Actual temperature
22.0°C
Desired temperature
or
.
EJHA04AAV3 + NHY2KOMB28+32AA
Daikin Altherma Hybrid hydrosplit heat pump
4P556862-1A – 2020.10
Table of Contents
