Table of Contents
3 Connections
Connection of the AC power adapter
Connect the power cord (included) to the AC power adapter (included), and insert the DC plug of the AC power adapter to the
DC jack on the rear panel.
Important:
• Do not insert the power plug into the power outlet yet as it will be plugged in "5 Turn on the devices (☞ Page 24)".
• Insert the DC plug all the way into the DC jack so that it will not loosen or come out.
• Secure the DC cable with the included cable clamp to prevent the DC plug from disconnection.
How to prevent the DC plug from disconnection
Secure the DC cable at 5 cm {2 inches} to 10 cm {4 inches} from the DC plug with the included cable clamp
through the clamp mount.
Clamp mount
Cable clamp (included)
① Pass the cable clamp (included) through the slit on the right side of the clamp mount.
② Tighten the DC cable by making a loop with the cable clamp as shown in the figure.
③ Tighten the DC cable at 5 cm {2 inches} to 10 cm {4 inches} from the DC plug and fix it to the clamp mount.
Cut the surplus part of the cable clamp as necessary.
(continued)
Power cord (included)
Power plug
Slit on the right side
②
①
DC jack
DC plug
DC cable
AC power adapter (included)
5 cm {2 inches} ~ 10 cm {4 inches}
③
21
Table of Contents
