Related Manuals for Haier HW80-B14959U1
Summary of Contents for Haier HW80-B14959U1
- Page 1 HW80-B14959U1 HW90-B14959U1 HW100-B14959U1 HW80-B14959S8U1 HW90-B14959S8U1 HW100-B14959S8U1...
- Page 2 Thank You Thank you for purchasing a Haier Product. Please read these instructions carefully before using this appliance. The instructions con- tain important information which will help you get the best out of the appliance and ensure safe and proper installation, use and maintenance.
-
Page 3: Table Of Contents
Content 1-Safety information ........................... 4 2-Product description ......................... 7 3-Control panel ............................ 8 4-Programmes ...........................12 5-Consumption ..........................13 6-Daily use ............................14 7-hOn ..............................19 8-Eco-friendly washing ........................22 9-Care and cleaning ..........................23 10-Troubleshooting ........................26 11-Installation .............................29 12-Technical data ..........................33 13-Customer service ........................34... -
Page 4: 1-Safety Information
1-Safety information Before switching on the appliance for the first time read the follow- ing safety hints! WARNING! Before first use Make sure there is no transport damage. Make sure all transport bolts are removed. Remove all packaging and keep out of children´s reach. Handle the appliance always with at least two persons because it is heavy. - Page 5 1-Safety information WARNING! Daily use Do not remove or insert the plug in the presence of flammable gas. Do not hot wash foam rubber or sponge-like materials. Do not wash any laundry which is polluted with flour. Do not open detergent drawer during any wash cycle. Do not touch the door during the washing process, it gets hot.
- Page 6 1-Safety information WARNING! Installation Install or use the appliance only where the temperature is above 5 °C. Do not place the appliance directly on a carpet, or close to a wall or furniture. Do not install the appliance in direct sunlight or in the near of heat sources(e.g.
-
Page 7: 2-Product Description
2-Product description Note: 2.1 Picture of appliance Front (Fig. 2-1): Rear side (Fig. 2-2): 盲孔深度2.5 m m Steam 红色灯珠 30. 06 Smart Synthetic Quick 15’ Refresh Cotton 20°C 冰蓝色灯珠 Remote Cotton Allergy Care Wool Spin Eco 40-60 1 Detergent/Softener drawer 1 Transportation bolts (T1-T4) Worktop 2 Backcover... - Page 8 盲孔深度2.5 m m Steam 红色灯珠 30. 06 Smart Synthetic Quick 15’ Refresh Cotton 20°C 冰蓝色灯珠 Remote Cotton Allergy Care Wool Spin Eco 40-60 activated within 2 minutes before starting the program or at the end of the program. With WIFI connection, the waiting time duration is 24h. Smart Synthetic Quick 15’...
-
Page 9: 3-Control Panel
3-Control panel Display symbols Speed, Temperature, etc Control panel is locked. Steam. Alarm. Pre-wash. Delay. 3.4 Function buttons The function buttons (Fig. 3-5) enable additional op- tions in the selected programme before programme starts. The related indicators are displayed. Steam gramme, all options are disabled. - Page 10 3-Control panel Note: Liquid detergent If using liquid detergent, it is not recommended to activate the end time delay. 3.4.2 Function button “ Steam“ Touch this button (Fig. 3-7) the steam program can be selected. When this program is selected, the default temperature is the Steam max temperature of this program.You can select if you require this function when programs"Smart,Mix,Synthetic, Cotton,Alle-...
- Page 11 3-Control panel 3.5 Child lock Choosing a programme and then start,touch button“ Delay” and 3-13 Speed ”Steam”( Fig .3-13) for 3 seconds simultaneously to block all panel elements against activation,panel display .For unlo- Steam cking please touch again the two buttons.The child lock indi- cator lights up when the child lock works.Feature is optional when the machine is running.
-
Page 12: 4-Programmes
4-Programmes Detergent compartment for: etergent Softener or care product • Detergent Yes, Optional, º Max. load Temperature Preset Function spin speed in kg in °C in rpm HW80/HW90 selectable Programme /HW100 range Fabrics type Lightly soiled mixed- • • • • • Smart 8/9/10 * to 60... -
Page 13: 5-Consumption
5-Consumption Scan QR code on energy label for energy consumption information. The actual energy consumption may differ from the declared one according to local conditions. Note: Auto Weight The appliance is equipped with a loading recognition. At low loading, energy, water and washing time will be reduced automatically in some programmes. -
Page 14: 6-Daily Use
6-Daily use 6.1 Power supply Connect the washing machine to a power supply (220V to 240V~/50Hz; Fig. 6-1). Please refer also to section INSTALLTION (see P29). 6.2 Water connection Before connecting check the cleanliness and clar- ity of the water inlet. Turn on the tap (Fig.6-2). - Page 15 6-Daily use Care chart Washing Washable up to 95°C Washable up to 60°C Washable up to 60°C normal process normal process mild process Washable up to 40°C Washable up to 40°C Washable up to 40°C normal process mild process very mild process Washable up to 30°C Washable up to 30°C Washable up to 30°C...
- Page 16 6-Daily use 6.5 Selecting detergent Use only machine wash approved detergent. See tips for countertop detergent stickers. Do not use dry cleaning agents such as trichloroethylene and similar products. Choose the best detergent Kind of detergent Programme Universal Colour Delicate Special Softener Smart...
- Page 17 6-Daily use 6.6 Adding detergent 1. Slide out the detergent drawer. 2. Put the required chemicals into corresponding compartments (Fig. 6-4), 3. Push back the drawer gently. Note: Remove detergent residues before next wash cycle from the detergent drawer. Do not overuse detergent or softener. Please follow the instruction on the detergent package.
- Page 18 6-Daily use 6.10 Start wash programme Touch “Start/Pause“ button (Fig. 6-8) to start. The LED of the”Start/ Pause“ button stops flashing and lights up continuously. Appliance operates according to present settings. Changes are only possible by cancelling the programme. 6.11 Interrupt / cancel wash programme To interrupt a running programme press gently “Start/Pause“.
-
Page 19: 7-Hon
Wi-Fi icon appears on the display 7.3 Download and installation of hOn APP: Download the hOn App on your device or by the link: go.haier-europe.com/download-app Note: Registration closed. For further use, you need to enter user name and password when you log in. - Page 20 7-hOn Note: W F network malfunction. Note: Use same Wi Fi ontrol Select the “Remote” program Note: Once the remote control is activated, if the end user doesn’t start any cycle from app in 10 minutes, the appliance will go to Networked Delay Start Mode, and keeps remote control up to 24 hours, then shut off.
- Page 21 7-hOn 1.Select the “Remote” program; ,rotate the knob to select other program or shut down to exit.
-
Page 22: 8-Eco-Friendly Washing
Environmentally responsible use To achieve best use of energy, water, detergent and time you should use the recom- mended maximum load size. Do not overload (hand width clearance above laundry). For slightly soiled laundry select the Quick 15’ programme. Apply exact dosages of each washing agent. - i f ciently cleaning below 60°C. -
Page 23: 9-Care And Cleaning
9-Care and cleaning 9.1 Cleaning the detergent drawer Take always care there are no detergent residues. Clean the drawer regularly (Fig. 9-1): 1. Pull out the drawer until it stops. 2. Press the release button and remove the drawer. 3. Flush the drawer with water until it is clean and insert the drawer back in the appliance. - Page 24 9-Care and cleaning 9.5 Long periods of disuse If the appliance is left idle for a longer period: 1. Pull out the electrical plug (Fig. 9-6). 3. Open the door to prevent formation of moisture and odours. Let door open while not used. Before next usage check carefully power cord, water inlet and drain hose.
- Page 25 9-Care and cleaning 9-14 9-15 (Fig. 9-14). 11. Close service flap. CAUTION! can escape.
-
Page 26: 10-Troubleshooting
10-Troubleshooting of a problem please check all shown possibilities and follow below instructions before you WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. improper repairs can cause considerable consequential damages. A damaged power cable should only be replaced by the manufacturer, its service 10.1 Information codes Following codes are displayed only for information referring to the washing cycle. - Page 27 10-Troubleshooting Problem Cause Solution Temperature sensor error. Contact the After sales service. Heating error. Contact the After sales service. Motor error. Contact the After sales service. Water level sensor error. Contact the After sales service. FC0, FC1 or Abnormal communication error. Contact the After sales service.
- Page 28 10-Troubleshooting Problem Cause Solution Excessive foam • Detergent is not a appropriate. • Check detergent recommen- dations. detergent drawer. • Excessive use of detergent. • Reduce amount of detergent. Automatic adjust- • Washing programme duration will • This is normal and doesn‘t af- ment of washing be adjusted.
-
Page 29: 11-Installation
11-Installation 11.1 Preparation Take the appliance out of the packaging. keep them out of childrens reach. While opening the package, water drops may be seen on plastic bag and porthole. This normal phenomenon results from water tests in the factory. Note: Packaging disposal Keep all packaging materials out of children´s reach and dispose them in an environmen- tally friendly manner. - Page 30 11-Installation 11-4 11-5 11.3 Dismantle the transportation bolts The transportation bolts are designed for clamping anti-vibration components inside the appliance during transportation to prevent inner damage. Remove all 4 bolts on the rear side and take out plastic spacers (Fig. 11-4)(Fig. 11-5). 11-6 11-7 Fill left holes with blanking plugs (Fig.
- Page 31 11-Installation 11.6 Drain Water Connection Fix the water drain hose properly to the piping. The hose has to reach at one point a height between 80 and 100 cm above the appliance bottom line! If possible keep always drain WARNING! Use only the supplied hose set for the connection.
- Page 32 11-Installation 11.7 Fresh Water Connection 11-12 11-13 Make sure that the gaskets are inserted. 1. Connect the water inlet hose with the angled end to the appliance (Fig. 11-12). Tighten the screw joint by hand. 2. The other end connect to a water tap with a 3/4 thread (Fig.
-
Page 33: 12-Technical Data
12-Technical data 12.1 Additional technical data HW100 HW90 HW80 Voltage in V 220-240 V~/50Hz Current in A Max power in W 2000 Water pressure in MPa 0.03≤P ≤1 Netto weight in kg 12.2 Product dimensions FRONT VIEW TOP VIEW HW100 HW90 HW80 PRODUCT DIMENSIONS... -
Page 34: 13-Customer Service
13-Customer service We recommend our Haier Customer Service and the use of original spare parts. ： your local dealer. and FAQs and where you can activate the service claim. To contact our Service, ensure that you have the following data available.