BEFORE USE COMPONENTS THANKS FOR PURCHASING A HAIER PRODUCT Please read these instructions carefully before using this appliance. The instructions contain important information which will help you get the best out of the appliance and ensure safe and proper installation, use and maintenance.
BEFORE USE PREPARATION PREPARING THE MACHINE Remove all the packing materials to prevent unsteadiness, including the polystyrene base. Upon opening the package, water drops may be seen on the plastic bag and the porthole. This is normal phenomenon resulting from water tests in the factory. DESCRIPTION This diagram may be slightly different from the layout of the washing machine you have just purchased due to technical improvements.
BEFORE USE SAFETY INSTRUCTIONS BEFORE SWITCHING THE APPLIANCE ON FOR THE FIRST TIME DO ... DO NOT ..Make sure that the transport bolts are removed before use..Touch or use the washing machine when barefoot or with wet or damp hands or feet.
BEFORE USE INSTALLATION DISMANTLE THE TRANSPORTATION BOLTS The transportation bolts are designed for clamping anti-vibration components inside of the washing machine during the transportation process. Remove the back cover. Remove the four bolts on the rear side and take out the synthetic stabilisers from within the machine.
Page 7
BEFORE USE INLET HOSE 1. Connect the nut on the inlet hose to the connector on the water valve. 2. Apply inlet hose to a water tap with cold, fresh water. Note: Use the hose-set supplied with the appliance. Old hose-sets should not be reused.
BEFORE USE CONTROL PANEL I HG t t o y l i Wash Temp. c i t Power press15' Rinse Speed i l e eans by Care Spin Start/pause Rinse Hold I n tense E n d Delay Prewash K L M N Intense washing button Display screen...
Page 9
BEFORE USE _ Press the “Speed” button to select the spin speed. The maximum selectable spin speed varies with the wash program. ¬ Spin Speed button E ¬ Washing _ Press the “Temp.” button to select the water wash temperature (--, 15, 20, 30, 40, 50, 60, 70, 80, 90). The maximum allowable heating temperature varies with programs.
Page 10
BEFORE USE Pre-Wash _Press the “Pre-wash” button to select or cancel the prewash program. The prewash program can be selected for washing heavily soiled clothes. Press the “Prewash” button, the “Pre-wash” icon will illuminate. Press the “Pre-wash” again, the prewash function will be cancelled and the “Pre-wash” icon will go out. When selecting the prewash function, add a proper amount of detergent into the prewash box, otherwise do not add any detergent into the prewash box.
Page 11
BEFORE USE WASH PROGRAM OPTIONS WASH DURDTION SPIN DURATION NUMBER OF RINSE INTENSE FUNCTION PROGRAM (MINUTES) (MINUTES) CYCLES 5-30 Hand Wash 5-30 Wool Delicate 5-30 5-50 5-50 Synthetic 5-60 Cotton Daily wash 5-40 5-40 Sport 25 5-20 Express 15 Jeans 5-40 Baby Care 5-50...
USING THE APPLIANCE PROGRAM SELECTION QUICK START GUIDE 1.Open door and put laundry in drum, checking that there are no coin, clips, paper tissues or sharp objects in the clothing 2.If using liquid detergent place the detergent in the manufactures recommended container in the drum. Note. Do not use the auto weigh function with liquid detergent, it may spoil the cloths.
Page 13
USING THE APPLIANCE PROGRAM SELECTION PROGRAM MODES 1 Detergent compartment for prewash mode 2 Detergent compartment 3 Compartment for softener and other additives Temperature Recommended Preset spin speed Program Maximum Preset Laundry 1 ¬ Hand Wash - - to 40 °C 30°C Cotton fabrics 800 rpm 2 ¬...
USING THE APPLIANCE CONSUMPTION AND TECHNICAL DATA CONSUMPTION TABLE PERFORMANCE SPIN DRYING MAX. LOAD TEMPERATURE PROGRAM WASHING TIME HW80-*86/HW70-*86/HW60-*86 HW80-*86/HW70-*86/HW60-*86 2 kg/2 kg/1kg 0:38 ¬ Hand Wash 30°C 2 kg/2 kg/1kg 0:35 ¬ Wool 30°C 2 kg/2 kg/1kg 0:38 ¬ Delicate 30°C Auto g/5 kg/3kg...
USING THE APPLIANCE WASHING METHODS PLEASE NOTE This washing machine is for domestic use only. If the machine is use for commercial purpose the guarantee will not be valid anymore.Do not use it for purposes other than that for which it was designed. Follow the instructions given on the label of each garment and wash only machine-washable garments.
USING THE APPLIANCE LOADING THE MACHINE Heavy Delicate Wash Temp. Silk Sport wash Wool Silent Rinse Speed Synthetic Quick Power Memory Spin Spin Auto Cotton Self-clean Start/Pause Strong wash Delay Pre-wash Soak Press and hold 2seconds to set door unlocked Open the washer door, put in the laundry piece by piece.
Page 17
USING THE APPLIANCE SETTING WASHING TEMPERATURE Press and hold down the temperature button until the desired temperature is selected . SETTING SPIN SPEED Press and hold down the speed button until the desired speed is selected.See "Opera- tional functions" on the "Control panel" pages (08 and 10) for selecting temperature and spin speed.
Page 18
USING THE APPLIANCE CARE CHART Resistant material Bleachable in cold water Don't dry clean Delicate fabric Do not bleach Dry flat Washable at 95 °C Iron at 200 °C Hung to dry Washable at 60 °C Iron at 150 °C Dry on clothes hanger Washable at 40 °C Iron at 100 °C...
USING THE APPLIANCE CLEANING & CARE AFTER WASHING Turn off the water supply and pull out electricity plug after each wash. Open the washer door to prevent formation of moisture and odours. If the washing machine is left idle for a long period, drain the water in the machine and replace the drain hose.
Page 20
USING THE APPLIANCE WATER INLET VALVE AND INLET VALVE FILTER To prevent blockage to the water supply by ingress of foreign substances, clean the water inlet valve and inlet valve filter regularly . MANUALLY OPENING THE WASHING MACHINE DOOR To add clothing when washing after the wash program has started or after a power cut, you want to remove the clothing, do the following steps.
MAINTENANCE DISPLAY CODES DISPLAY CODES AND SPECIAL FUNCTIONS CODES CAUSES SOLUTIONS Err1 ¬ Door is not properly shut. _ Shut the door properly and then press the Start/Pause button. Err2 ¬ Drainage error, water not emptied within 6 _ Clean the filter and check the drain hose for blockage. If error minutes.
MAINTENANCE TROUBLESHOOTING TROUBLESHOOTING The following circumstances do not constitute problems. Do not contact the Service Center until the problem has been confirmed. PROBLEM CAUSES SOLUTIONS Washing machine fails to ¬ Poor connection to the power supply. _ Check connection to the power supply. operate.
Page 23
INSTALLATION Heavy Delicate Wash Temp. Silk Sport wash Wool Silent Rinse Speed Synthetic Quick Power Memory Spin Spin Auto Cotton Self-clean Start/Pause Strong wash Delay Pre-wash Soak Press and hold 2seconds to set door unlocked...