Available languages

Available languages

Quick Links

User servicing manual
MODEL CODE: RT62K7*
1. You may find the installation, maintenance, repair, cleaning information about the device,
the list of spare parts of the device, and the necessary information for ordering spare
parts that can be supplied by authorized service http://samsung.com/support or call
center 4447711
2. The model code is labelled on the outer side of your product.
- You can check the model code and version on the barcode label at the bottom left of
the product.
3. For replacement parts, make sure the part name matches that of the illustration in this
manual.
- User-serviceable parts are limited to handles (some models only), gaskets, drawers, and
hinges.
NOTE
Following the repair by a non-authorised service provider, self-repair or non-professional
repair of the product, Samsung is not liable for any damage to the product, any injury or
any other product safety issue caused by any attempt to repair the product which does
not carefully follow these repair and maintenance instructions. Any damage to the product
caused by an attempt to repair the product by any person other than a Samsung certified
service provider will not be covered by the warranty.
CAUTION
• The part name listed on the site may differ from that in this manual. Please make sure you
choose the right part name.
• Replacing hinges requires extreme caution because it involves detaching the door.
• Be sure to wear safety gloves while making repairs.
TMF_RT7000_User-servicing-manual_EN.indd 1
English
2021-02-04
11:56:58
loading

Summary of Contents for Samsung RT62K7 Series

  • Page 1 Following the repair by a non-authorised service provider, self-repair or non-professional repair of the product, Samsung is not liable for any damage to the product, any injury or any other product safety issue caused by any attempt to repair the product which does not carefully follow these repair and maintenance instructions.
  • Page 2 The actual image and provided parts of the refrigerator may differ, depending on the model and the country. 01 Hinge Up 02 Hinge Mid 03 Hinge Low 04 Gasket 05 Drawer 06 Barcode label English TMF_RT7000_User-servicing-manual_EN.indd 2 2021-02-04 11:56:58...
  • Page 3: Handle Replacement

    Handle replacement CAUTION • When replacing the door handle, take care not to scratch the front of the door. • Firmly press the handles at the supports. Make sure there is no gap between the supports and the door. • Tightly fasten the screws when attaching the handle. •...
  • Page 4: Gasket Replacement

    Gasket replacement CAUTION Make sure you firmly attach the gasket. Otherwise, cold air from the refrigerator may leak. To remove the gasket 1. Pull the 4 corners of gasket Fre & Ref. 2. Pull the center of gasket. To replace the gasket Attach a new gasket to the refrigerator door.
  • Page 5 Drawer replacement CAUTION Check that the drawer is inserted properly into the rail during assembly. To remove the drawer 1. Remove the drawer by pulling the roller part and lifting it up. To reattach the drawers Reattaching the drawers follows the reverse order of their respective removal steps. Hinge replacement To replace the hinges, you must remove the doors first.
  • Page 6 Tools required (not provided) Phillips screwdriver Flat-head screwdriver 11 mm spanner 10 mm socket wrench Allen wrench (5 mm) 10 mm spanner Reversing the door Hinge Up 1. Remove cap cover hinge. 2. Remove screw 1 ea Cover hinge with the (+) screwdriver and Open.
  • Page 7 4. Disconnect the wire connector on the hinge up. CAUTION Be sure to unplug the power cord before performing the operation above. 5. Remove the 2 hex bolts that hold the hinge on the top of the refrigerator with the 10mm socket wrench. 6.
  • Page 8 Hinge Mid 1. Remove the 2 hex bolts screw by Hexagon wrench. 2. Remove the screw 1 ea the hinge With (+) screwdriver. 3. Diassembly hinge mid from door ref up. CAUTION • Must working more than 2 people. • Be sure to unplug the power cord before performing the operation above.
  • Page 9 Hinge Low 1. Lay down product (Refer picture). CAUTION • Must to a pad underneath to protect the back of the product from being damaged. • Must working more than 2 people. • Be sure to unplug the power cord before performing the operation above.
  • Page 10 ürünün profesyonel olmayan onarımı sonrasında, üründe meydana gelen hasarlardan, yaralanmalardan veya bu onarım ve bakım talimatlarını dikkatli bir şekilde izlemeden onarmaya çalışmaktan kaynaklanan ürünle ilgili diğer güvenlik sorunlarından Samsung sorumlu değildir. Samsung yetkili servis sağlayıcısı haricinde birinin ürünü onarmaya çalışmasından kaynaklanan üründeki hasarlar garanti kapsamına alınmaz. DİKKAT •...
  • Page 11 Buzdolabının gerçek görüntüsü ve sağlanan parçalar modele ve ülkeye bağlı olarak değişebilir. 01 Üst Menteşe 02 Orta Menteşe 03 Alt Menteşe 04 Conta 05 Çekmece 06 Barkod etiketi Türkçe TMF_RT7000_User-servicing-manual_TR.indd 2 2021-02-04 11:56:53...
  • Page 12 Kol değiştirme DİKKAT • Kapı kolunu değiştirirken kapının önünü çizmemeye dikkat edin. • Sıkıca desteklerdeki kollara basın. Destekler ve kapı arasında hiç boşluk olmadığından emin olun. • Kolu takarken vidaları iyice sıkın. • Ürünü kullanmadan önce kolun iyice takıldığını kontrol edin. Kolları...
  • Page 13 Contayı değiştirme DİKKAT Contayı iyice taktığınızdan emin olun. Aksi halde buzdolabından soğuk hava sızabilir. Contayı çıkarmak için 1. Soğutucu ve buzdolabındaki contanın 4 köşesini çekin. DONDURUCU BUZDOLABI 2. Contanın ortasını çekin. Contayı değiştirmek için Buzdolabı kapısına yeni bir conta takın. Yeni conta ve kapı arasında hiç boşluk olmadığından emin olun.
  • Page 14 Çekmeceyi değiştirme DİKKAT Montaj sırasında çekmecenin raya düzgün takıldığını kontrol edin. Çekmeceyi çıkarmak için 1. Dönen parçayı çekerek ve yukarı doğru kaldırarak çekmeceyi çıkarın. Çekmeceleri yeniden takmak için Çekmeceleri yeniden takmak için ilgili çıkarma adımlarını ters sırada izleyin. Menteşeyi değiştirme Menteşeleri değiştirmek için önce kapıları...
  • Page 15 Gerekli aletler (sağlanmaz) Yıldız tornavida Düz tornavida 11 mm anahtar 10 mm lokma anahtar Allen anahtar (5 mm) 10 mm anahtar Kapıyı ters çevirme Üst Menteşe 1. Kapak menteşesini çıkarın. 2. (+) tornavida ile menteşe kapağındaki 1 vidayı çıkarın ve Açın. 3.
  • Page 16 4. Üst menteşedeki kablo konektörünün bağlantısını kesin. DİKKAT Yukarıdaki işlemi gerçekleştirmeden önce güç kablosunu prizden çıkardığınızdan emin olun. 5. 10 mm lokma anahtarla buzdolabının en üstündeki menteşeyi tutan 2 altıgen cıvatayı sökün. 6. Sağ/Sol üst menteşeyi çıkarın. 7. Kapıyı çıkarın. DİKKAT 2'den fazla kişi çalışmalıdır.
  • Page 17 Orta Menteşe 1. Altıgen anahtarla 2 altıgen cıvatayı çıkarın. 2. Menteşedeki 1 adet vidayı (+) tornavida ile çıkarın. 3. Buzdolabı kapısının üstünden orta menteşeyi sökün. DİKKAT • 2'den fazla kişi çalışmalıdır. • Yukarıdaki işlemi gerçekleştirmeden önce güç kablosunu prizden çıkardığınızdan emin olun.
  • Page 18 Alt Menteşe 1. Ürünü yere yatırın (Resme bakın). DİKKAT • Ürünün arkasının hasar görmesini engellemek için ürünün altına bir koruma yerleştirmeniz gerekir. • 2'den fazla kişi çalışmalıdır. • Yukarıdaki işlemi gerçekleştirmeden önce güç kablosunu prizden çıkardığınızdan emin olun. 2. Menteşeyi tutan 3 altıgen cıvatayı 8 mm lokma anahtar ile veya (+) tornavida kullanarak çıkarın.