Configuration Examples for Device Administration
Command
show mac address-table secure
show mac address-table static
show mac address-table vlan vlan-id
Configuration Examples for Device Administration
Example: Setting the System Clock
This example shows how to manually set the system clock:
Device# clock set 13:32:00 23 July 2013
Examples: Configuring Summer Time
This example (for daylight savings time) shows how to specify that summer time starts on March 10 at 02:00
and ends on November 3 at 02:00:
Device(config)# clock summer-time PDT recurring PST date
10 March 2013 2:00 3 November 2013 2:00
This example shows how to set summer time start and end dates:
Device(config)#clock summer-time PST date
20 March 2013 2:00 20 November 2013 2:00
Example: Configuring a MOTD Banner
This example shows how to configure a MOTD banner by using the pound sign (#) symbol as the beginning
and ending delimiter:
Device(config)# banner motd #
This is a secure site. Only authorized users are allowed.
For access, contact technical support.
#
Device(config)#
This example shows the banner that appears from the previous configuration:
Unix> telnet 192.0.2.15
System Management Configuration Guide, Cisco IOS XE Fuji 16.8.x (Catalyst 9500 Switches)
38
Purpose
Displays the secure MAC addresses.
Displays only static MAC address table entries.
Displays the MAC address table information for the
specified VLAN.
Administering the Device