Messages On Display - GE AMX-4+ Technical Publications

GE MEDICAL SYSTEMS

REV 10

SECTION 8

Two kinds of messages can appear on the message display on the control cover: status

messages and error messages.

Status messages simply inform you of the operating condition of the AMX−4+, and

look something like this.

Another type of message, called an error message, may appear should a problem occur

with the equipment. An error message looks something like this.

Note that an error message includes an alphanumeric code, and will display one line at

a time.

If an error message appears, follow these steps.

1. Try the function again. If the problem is corrected, and no error message is dis-

played, proceed as usual.

2. If the error message still displays, turn the unit OFF then back ON.

D

Diagnostics or self−tests are quickly performed when the unit is turned back

on.

D

When diagnostics are complete, the following message displays:

ERROR XXX

OCCURRED WHEN

THE UNIT WAS

LAST OPERATED −−

PROCEED WITH

−−− CAUTION −−−

3. Now try the function once more. If the problem is corrected, and no error mes-

sage is displayed, proceed as usual.

4. If the problem persists, call your service representative, and report the code and

message shown on the display. This will prepare service for the type of problem

encountered and the service required.

On the following pages, we'll list the status messages and include a brief explanation of

each one.

8−1

(MODEL 2169360, 2236420 & 2275938 SERIES)

READY FOR X−RAY

ERROR 100

CHARGE FAULT

AMX−4+ OPERATION

om 2166913−100