Siemens S7-1500 Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. I/O Systems
  5. Simatic S7-1500
  6. Manual

Siemens S7-1500 Manual

Simatic, digital input/output module, di 32x24vdc snk/src/dq 32x24vdc/0.3a snk ba 6es7523-1bp50-0aa0
Hide thumbs Also See for S7-1500:
Table of Contents

Quick Links

Table of Contents
loading

Related Manuals for Siemens S7-1500

Summary of Contents for Siemens S7-1500

  • Page 2 Preface S7-1500 / ET 200MP Documentation Guide SIMATIC Product overview Wiring S7-1500/ET 200MP Digital input/output module DI 32x24VDC SNK/SRC/ Address space DQ 32x24VDC/0.3A SNK BA (6ES7523-1BP50-0AA0) Diagnostics alarms Technical specifications Equipment Manual Dimensional drawing 07/2020 A5E48027024-AA...
  • Page 3 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 4: Preface

    The information provided in this manual and in the system/function manuals supports you in commissioning the systems. Conventions The term "CPU" is used in this manual both for the CPUs of the S7-1500 automation system and for interface modules of the ET 200MP distributed I/O system. Please also observe notes marked as follows:...
  • Page 5 We are liable for the product described, including the open-source software contained in it, pursuant to the conditions applicable to the product. Siemens accepts no liability for the use of the open source software over and above the intended program sequence, or for any faults caused by modifications to the software.

  • Page 6: Table Of Contents

    Table of contents Preface ..............................3 S7-1500 / ET 200MP Documentation Guide ................... 6 Product overview ........................... 8 Properties ..........................8 Wiring ..............................11 Wiring and block diagram ....................11 Terminal assignment X10 and X11 ..................12 Connecting a module with a connection module ..............15 Wiring of the module ......................

  • Page 7: S7-1500 / Et 200Mp Documentation Guide

    This arrangement enables you to access the specific content you require. Basic information The System Manual and Getting Started describe in detail the configuration, installation, wiring and commissioning of the SIMATIC S7-1500 and ET 200MP systems. The STEP 7 online help supports you in the configuration and programming. Device information Product manuals contain a compact description of the module-specific information, such as properties, wiring diagrams, characteristics and technical specifications.
  • Page 8 S7-1500 / ET 200MP Documentation Guide Manual Collection S7-1500/ET 200MP The Manual Collection contains the complete documentation on the SIMATIC S7-1500 automation system and the ET 200MP distributed I/O system gathered together in one file. You can find the Manual Collection on the Internet (https://support.industry.siemens.com/cs/ww/en/view/86140384).

  • Page 9: Product Overview

    Product overview Properties Part number: 6ES7523-1BP50-0AA0 Figure 2-1 View of the module DI 32x24VDC SNK/SRC/DQ 32x24VDC/0.3A SNK BA Digital input/output module DI 32x24VDC SNK/SRC/DQ 32x24VDC/0.3A SNK BA (6ES7523-1BP50-0AA0) Equipment Manual, 07/2020, A5E48027024-AA...
  • Page 10 The following accessories are supplied with the module and can be ordered as spare parts: • U connector • Universal front door with the article number: 6ES7 591-8AA00-0AA0 You can find additional information in the system manual S7-1500/ET 200MP (https://support.industry.siemens.com/cs/ww/en/view/59191792). Digital input/output module DI 32x24VDC SNK/SRC/DQ 32x24VDC/0.3A SNK BA (6ES7523-1BP50-0AA0)
  • Page 11 Product overview 2.1 Properties Other components The following must be ordered separately: • SIMATIC TOP connect connection module • Pre-fabricated connecting cable with IDC connectors For additional information, see section Connecting a module with a connection module (Page 15) Digital input/output module DI 32x24VDC SNK/SRC/DQ 32x24VDC/0.3A SNK BA (6ES7523-1BP50-0AA0) Equipment Manual, 07/2020, A5E48027024-AA...

  • Page 12: Wiring

    Wiring Wiring and block diagram This section contains the block diagram of the module and the terminal assignment. Wiring and block diagram The following figure shows the terminal assignment and the assignment of the channels. • Inputs: Channel 0 to 31 to connector X10. •...

  • Page 13: Terminal Assignment X10 And X11

    Wiring 3.2 Terminal assignment X10 and X11 Terminal assignment X10 and X11 The following figure shows the assignment of the channels to the addresses. Figure 3-2 Front view of the module without front door Digital input/output module DI 32x24VDC SNK/SRC/DQ 32x24VDC/0.3A SNK BA (6ES7523-1BP50-0AA0) Equipment Manual, 07/2020, A5E48027024-AA...
  • Page 14 Wiring 3.2 Terminal assignment X10 and X11 Terminal and address assignment For connecting sensors or actuators, we recommend using the SIMATIC TOP connect pre- assembled connecting cables and the SIMATIC TOP connect connection modules. However, if you choose another wiring option, you will need the following tables. Table 3- 1 Assignment for connector X10 of the module Assignment for inputs to X10...
  • Page 15 Wiring 3.2 Terminal assignment X10 and X11 Table 3- 2 Assignment for the connector X11 of the module Assignment for outputs to X11 Terminal Channel Address Terminal Channel Address Channel 0 Channel 16 x+2.0 Channel 1 Channel 17 x+2.1 Channel 2 Channel 18 x+2.2 Channel 3...

  • Page 16: Connecting A Module With A Connection Module

    You can find additional information on the components of the SIMATIC TOP connect system cabling, e.g. for connecting connection modules, in the equipment manual SIMATIC TOP connect for S7-1500 and ET 200MP (https://support.industry.siemens.com/cs/ww/en/view/95924607). Note...
  • Page 17 We recommend you use the TIA Selection Tool for planning your project. The TIA Selection Tool is available free of charge as a desktop version for download or as a cloud version, refer to the Internet (https://new.siemens.com/global/en/products/automation/topic-areas/tia/tia- selection-tool.html). Digital input/output module DI 32x24VDC SNK/SRC/DQ 32x24VDC/0.3A SNK BA (6ES7523-1BP50-0AA0)

  • Page 18: Wiring Of The Module

    Wiring 3.4 Wiring of the module Wiring of the module Requirement • The I/O modules are installed on the mounting rail. • The supply voltage of the station is switched off. Procedure 1. Plug the two SIMATIC TOP connect connecting cables with the 40-pin IDC connector into X10 and X11.
  • Page 19 SIMATIC TOP connect connection module. Additional information You can find out how to wire the SIMATIC TOP connect connection module in the equipment manual SIMATIC TOP connect for S7-1500 and ET 200MP (https://support.industry.siemens.com/cs/ww/en/view/95924607). Digital input/output module DI 32x24VDC SNK/SRC/DQ 32x24VDC/0.3A SNK BA (6ES7523-1BP50-0AA0)

  • Page 20: Fuse

    Wiring 3.5 Fuse Fuse Miniature circuit breaker Inputs The supply lines of groups are to be protected with a 4 A miniature circuit breaker with tripping characteristic C or B. Below, you see the connection for "Sourcing" mode and for "Sinking" mode. Outputs The supply lines, max.
  • Page 21 Wiring 3.5 Fuse Figure 3-6 "Sinking" mode for the inputs Digital input/output module DI 32x24VDC SNK/SRC/DQ 32x24VDC/0.3A SNK BA (6ES7523-1BP50-0AA0) Equipment Manual, 07/2020, A5E48027024-AA...

  • Page 22: Address Space

    Address space The module can be configured in various ways in STEP 7. Depending on the configuration, additional/different addresses are assigned in the process image input/output. Configuration options of DI 32x24VDC SNK/SRC/DQ 32x24VDC/0.3A SNK BA You can configure the module with STEP 7 (TIA Portal) or with a GSD file. When you configure the module by means of the GSD file, the configurations are available under different abbreviations/module names.
  • Page 23 Address space Address space for configuration as 1 x 64-channel DI 32x24VDC SNK/SRC/DQ 32x24VDC/0.3A SNK BA The figure below shows the address space assignment for configuration as a 1 x 64-channel module (32 digital inputs / 32 digital outputs). You can freely assign the start address for the module.
  • Page 24 Address space Address space for configuration as 8 x 8-channel DI 32x24VDC SNK/SRC/DQ 32x24VDC/0.3A SNK BA S For the configuration as an 8 x 8-channel module, the channels of the module are divided into multiple submodules. The submodules can be assigned to different IO controllers when the module is used in a shared device.
  • Page 25 Address space Address space for configuration as 1 x 64-channel DI 32x24VDC SNK/SRC/DQ 32x24VDC/0.3A SNK BA MSI/MSO For configuration as a 1 x 64-channel module (module-internal Shared Input, MSI / module- internal Shared Output, MSO), the channels for inputs or outputs are copied to multiple submodules.
  • Page 26 Address space The figure below shows the assignment of the address space with submodule 1 and the value status. Figure 4-3 Address space for configuration as 1 x 64-channel DI 32x24VDC SNK/SRC/DQ 32x24VDC/0.3A SNK BA MSI/MSO Digital input/output module DI 32x24VDC SNK/SRC/DQ 32x24VDC/0.3A SNK BA (6ES7523-1BP50-0AA0) Equipment Manual, 07/2020, A5E48027024-AA...
  • Page 27 Address space The figure below shows the assignment of the address space with submodule 2 and the value status. Figure 4-4 Address space for configuration as 1 x 64-channel DI 32x24VDC SNK/SRC/DQ 32x24VDC/0.3A SNK BA MSI/MSO Digital input/output module DI 32x24VDC SNK/SRC/DQ 32x24VDC/0.3A SNK BA (6ES7523-1BP50-0AA0) Equipment Manual, 07/2020, A5E48027024-AA...
  • Page 28 Address space The figure below shows the assignment of the address space with submodule 3 and the value status. Figure 4-5 Address space for configuration as 1 x 64-channel DI 32x24VDC SNK/SRC/DQ 32x24VDC/0.3A SNK BA MSI/MSO Digital input/output module DI 32x24VDC SNK/SRC/DQ 32x24VDC/0.3A SNK BA (6ES7523-1BP50-0AA0) Equipment Manual, 07/2020, A5E48027024-AA...
  • Page 29 You can find information on the module-internal shared input/shared output (MSI/MSO) function in the section "Module-internal shared input / Module-internal shared output (MSI/MSO)" of the function manual PROFINET with STEP 7 V16 (https://support.industry.siemens.com/cs/ww/en/view/49948856). Digital input/output module DI 32x24VDC SNK/SRC/DQ 32x24VDC/0.3A SNK BA (6ES7523-1BP50-0AA0) Equipment Manual, 07/2020, A5E48027024-AA...

  • Page 30: Diagnostics Alarms

    Diagnostics alarms The module has no selectable diagnostics. Diagnostics alarms, for example, cannot be output with STEP 7 (TIA Portal). Status and error displays LED displays The figure below shows the LED displays (status and error displays) of DI 32x24VDC SNK/SRC/DQ 32x24VDC/0.3A SNK BA.
  • Page 31 Diagnostics alarms 5.1 Status and error displays Meaning of the LED displays The tables below explain the meaning of the status and error displays. LED RUN/ERROR Table 5- 1 RUN/ERROR status and error displays Meaning Remedy ERROR Voltage missing or too low at backplane bus. •...

  • Page 32: Technical Specifications

    The following table shows the technical specifications as of 07/2020. You can find a data sheet including daily updated technical specifications on the Internet (https://support.industry.siemens.com/cs/ww/en/ps/td). Enter the article number or the short designation of the module on the website. Article number...
  • Page 33 Technical specifications Article number 6ES7523-1BP50-0AA0 Supply voltage Rated value (DC) 24 V permissible range, lower limit (DC) 19.2 V permissible range, upper limit (DC) 28.8 V Reverse polarity protection Yes; Through internal protection with 4 A per group Input current Current consumption, max.
  • Page 34 Technical specifications Article number 6ES7523-1BP50-0AA0 for technological functions parameterizable – Cable length 1 000 m • shielded, max. 600 m • unshielded, max. Digital outputs Type of digital output Transistor Number of digital outputs Current-sinking Current-sourcing Digital outputs, parameterizable Short-circuit protection No;...
  • Page 35 Technical specifications Article number 6ES7523-1BP50-0AA0 Total current of the outputs 0.3 A • Current per channel, max. • Current per group, max. • Current per module, max. Total current of the outputs (per module) horizontal installation up to 60 °C, max. –...
  • Page 36 Technical specifications Article number 6ES7523-1BP50-0AA0 Potential separation Potential separation channels • between the channels 16; 32 when using SIMATIC TOP connect connec- • between the channels, in groups of tion module • between the channels and backplane bus Isolation Isolation tested with 707 V DC (type test) Ambient conditions Ambient temperature during operation...

  • Page 37: Dimensional Drawing

    Dimensional drawing The dimensional drawing of the module on the mounting rail, as well as a dimensional drawing with open front cover, are provided in this appendix. Always observe the specified dimensions for installation in cabinets, control rooms, etc. Figure A-1 Dimensional drawing of the DI 32x24VDC SNK/SRC/DQ 32x24VDC/0.3A SNK BA module Digital input/output module DI 32x24VDC SNK/SRC/DQ 32x24VDC/0.3A SNK BA (6ES7523-1BP50-0AA0) Equipment Manual, 07/2020, A5E48027024-AA...
  • Page 38 Dimensional drawing Figure A-2 Dimension drawing of the DI 32x24VDC SNK/SRC/DQ 32x24VDC/0.3A SNK BA module, side view with open front cover Digital input/output module DI 32x24VDC SNK/SRC/DQ 32x24VDC/0.3A SNK BA (6ES7523-1BP50-0AA0) Equipment Manual, 07/2020, A5E48027024-AA...

This manual is also suitable for:

Et 200mp

Table of Contents