Dell PowerEdge 840 Information Update

FJ099ap0.fm Page 9 Wednesday, September 6, 2006 3:10 PM

Dell™ PowerEdge™ 840 Systems

Information Update

This document provides updated information for your system on the following topic:

When a setup password is enabled for the System Setup program, the system gives you one chance to

enter the setup password correctly. If you enter the password incorrectly, the system displays an error

message and opens the System Setup program for viewing only. You will not be able to change any of the

System Setup fields except for the system password. If you have already entered the system password

during the current session, you can change the system password if the Password Status field is set to

Unlocked. To change the Password Status field from Locked to Unlocked, you must enter the correct

setup password.

___________________

Information in this document is subject to change without notice.

© 2006 Dell Inc. All rights reserved. Printed in Malaysia.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc. Other trademarks and trade names may be used in this

document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in

trademarks and trade names other than its own.

September 2006