D-Link DP-300U Quick Installaion Manual
Fast ethernet print server
Hide thumbs
Also See for DP-300U:
- User manual (152 pages) ,
- Quick installation manual (76 pages) ,
- Specifications (2 pages)
Table of Contents
Quick Links
See also:
User Manual
This product can be setup using
any current web browser, i.e.,
Internet Explorer 6 or Netscape
Navigator 7.0
Before You Begin
You will need an Ethernet-enabled device, such as a laptop or desktop computer
and a USB or parallel-port printer that will connect to the DP-300U.
Important: TURN OFF the power to the printer before installing
the DP-300U.
Check Your Package Contents
If any of the above items are missing, please contact your reseller.
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
DP-300U Multi-Port Print Server
CD-ROM (Software, Manual and Warranty)
5V DC 2.5A Power Adapter
specifications subject to change without notice. DP-300U 02142003
1
DP-300U
D-Link Fast Ethernet
Print Server
Using a power
supply with a
different voltage rating
will damage this
product and void its
warranty.
Table of Contents
Related Manuals for D-Link DP-300U
Summary of Contents for D-Link DP-300U
-
Page 1: Before You Begin
If any of the above items are missing, please contact your reseller. ©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DP-300U 02142003... - Page 2 “Network Port” (shown below.) Connect the other end of the cable to the LAN port of the gateway or the power cord to the DP-300U until you are advised to do so Next, make sure that the Printer is turned OFF.
- Page 3 CD-ROM. The factory default IP address of the DP-300U is 192.168.0.10. In order to print to the printer(s) through the DP-300U, the DP-300U must have the same IP network settings as your network. IP address can be assigned manually or automatically by DHCP, BOOTP or RARP.
- Page 4 Using your web browser enter the IP address of the DP-300U. By default the IP address is set 192.168.0.10 The IP address of the DP-300U can be modified on the Network tab of the web configuration menu. The following instructions use the print server’s default IP address as...
- Page 5 Setting up your DP-300U for network printing in Windows XP Click on the Configure tab to view the current Port Settings. Write down on a piece of paper the Port name that you wish to use. For Windows XP: Go to Start>Printers and Faxes>Add a Printer or Go to Start>Control...
- Page 6 Setting up your DP-300U for network printing in Windows XP Select “Local Printer.” Please make sure to deselect Automatically detect and install my Plug an Play printer. Click Next Select “Create a new port.” At the pull-down menu, high- light “Standard TCP/IP Port.”...
- Page 7 Setting up your DP-300U for network printing in Windows XP Type in the IP address of the print server. (i.e. 192.168.0.10) Input the port name of the port being used by the printer Click Next This may take a few seconds Select “Custom”...
- Page 8 Setting up your DP-300U for network printing in Windows XP Click Next Click Finish In this window, scroll down to find your printer. (If it is not listed, insert the driver CD or diskette that came with your printer.) Click on “Have Disk.”...
- Page 9 Setting up your DP-300U for network printing in Windows XP At this screen, you can input a name for this printer. Click Next Select “Yes” to print a test page Click Next Your Setup is Complete! The printer is now ready for printing with Windows XP, on your network.
- Page 10 Notes...
- Page 11 Notes...
-
Page 12: Technical Support
You can find the most recent software and user documentation on the D-Linkwebsite. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website or by phone.