D-Link DP-301P+ Quick Installation Manual
Fast ethernet print server
Hide thumbs
Also See for DP-301P+:
- User manual (73 pages) ,
- Quick installation manual (20 pages) ,
- Manual (150 pages)
This product can be setup using
any current web browser, i.e.,
Internet Explorer 6 or Netscape
Navigator 7.0
Before You Begin
You will need an Ethernet-enabled device, such as a laptop or desktop computer
and a parallel-port printer that will connect to the DP-301P+.
Important: TURN OFF the power to the printer before installing
the DP-301P+.
Check Your Package Contents
Check Your Package Contents
Check Your Package Contents
Check Your Package Contents
Check Your Package Contents
If any of the above items are missing, please contact your reseller.
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
DP-301P+ Fast Ethernet Print Server
CD-ROM (Software, Manual and Warranty)
5V DC 2.5A Power Adapter
specifications subject to change without notice. DP-301P+ 09232003
1
DP-301P+
D-Link Fast Ethernet
Print Server
Using a power
supply with a
different voltage rating
will damage this
product and void its
warranty.
Table of Contents
Related Manuals for D-Link DP-301P+
Summary of Contents for D-Link DP-301P+
-
Page 1: Before You Begin
If any of the above items are missing, please contact your reseller. ©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DP-301P+ 09232003... - Page 2 Connecting The DP-301P+ To Your Network First, insert one end of a straight-through CAT5 Ethernet RJ-45 cable into the “Network Port” (shown below.) Connect the other end of the cable to the LAN port of the router or the power cord to the DP-301P+ until you are advised to do Next, make sure that the Printer is turned OFF.
- Page 3 Setting up your DP-301P+ for network printing in Windows XP For additional Windows operating system setup or information on the web-management interface, refer to the manual located on the CD-ROM. For Mac OS printing, please refer to the manual located on the CD-ROM The factory default IP address of the DP-301P+ is 192.168.0.10.
- Page 4 Setting up your DP-301P+ for network printing in Windows XP Click OK to apply IP address settings. Click Using your web browser enter the IP address of the DP-301P+. By default the IP address is set 192.168.0.10 The IP address of the DP-301P+ can be modified on the Network tab of the web configuration menu.
- Page 5 Setting up your DP-301P+ for network printing in Windows XP Click on the Configuration tab to view the current Port Settings. Write down on a piece of paper the Port name that you wish to use. For Windows XP: Go to Start>Printers and Faxes>Add a Printer or Go to Start>Control Panel>...
- Page 6 Setting up your DP-301P+ for network printing in Windows XP Select “Local Printer.” Please make sure to deselect Automatically detect and install my Plug an Play printer. Click Next Select “Create a new port.” At the pull-down menu, high- light “Standard TCP/IP Port.” Click Next Click...
- Page 7 Setting up your DP-301P+ for network printing in Windows XP Type in the IP address of the print server. (i.e. 192.168.0.10) The port name will automati- cally be filled in. Click Next This may take a few seconds Select “Custom” Then click on Settings.
- Page 8 Setting up your DP-301P+ for network printing in Windows XP Click Next Click Finish In this window, scroll down to find your printer. (If it is not listed, insert the driver CD or diskette that came with your printer.) Click on “Have Disk...” Then, scroll down and highlight the printer.
- Page 9 Setting up your DP-301P+ for network printing in Windows XP At this screen, you can input a name for this printer. Click Next Select “Yes” to print a test page Click Next Your Setup is Complete! The printer is now ready for printing with Windows XP, on your network.
- Page 10 Technical Support Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product.