Table of Contents
Sailer Manual HPVFE
Mounting
•Mount the drive upright on a flat, vertical and level surface.
–Install on 35 mm DIN Rail (for frames A and B).
Or
–Install with screws.
Table 1.A Screw Mounting Recommendations
Minimum Panel Thickness
1.9 mm (0.0747 in.)
•Protect the cooling fan by avoiding dust or metallic particles.
•Do not expose to a corrosive atmosphere.
•Protect from moisture and direct sunlight.
Minimum Mounting Clearances
Refer to
Appendix B
for mounting dimensions.
Ambient Operating Temperatures
Table 1.B Enclosure and Clearance Requirements
Horizontal Clearance between drives
0 mm and greater
25 mm and greater
Drive enclosure is rated IP20, NEMA/UL Type Open.
Screw Size
M4 (#8-32)
Ambient Temperature
Minimum
-10°C (14°F)
-10°C (14°F)
8
Sailer Manual HPVFE
Mounting Torque
1.56-1.96 N-m (14-17 lb.-in.)
Maximum
40°C (104°F)
50°C (122°F)
- Quick Links:
- Parameter Organization
- Faults
Hide quick links:
Chapters
Table of Contents
